In the video, 1A Auto shows how to replace a snapped, bent, or stuck door lock cable. The video is applicable to the 05, 06, 07, 08, 09, 10, 11 Honda Civic.
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/ton/1AXAA00013
• Phillips Head Screwdriver http://1aau.to/ton/1AXAA00013
• 10mm Socket http://1aau.to/tBC/1AXAA00017
• Trim Tool Set http://1aau.to/teq/1AXXX00004
• Ratchet http://1aau.to/tGx/1AXAA00016
• Socket Extensions http://1aau.to/tLP/1AXAA00015
• Pick http://1aau.to/tcn/1AXAA00037
• Razor Blade / Gasket Scraper http://1aau.to/tah/1AXAA00280
For More Info visit us at http://1aau.to/h/aq9/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Oh yeah, I already did this and the cables is the most difficult part of it.
At 20:07, you replace the cord (door pull) back to the door pull handle. My door pull handle will not lock once I replace the cord. Every time I connect it, I attempt to put the panel back on, then the door pull cord becomes undone from the door pull handle. Do you know where I can start regarding this? Thank you so much for your help.
part number?
Would this be the same procedure for a car with manual locks (no actuator)?
How did you determine that the issue was the cord and not the actuator? I changed the actuator on my car but it still doesn't open from the inside. Now I'm not sure if it the door handle cord that I need to replace or the door handle?
Thanks for a great video. I wouldn't of been able to change my broken opening cable without it. Oem part was only $10 shipped from Amazon. The reassembly was a huge pain but it's fixed and I'm very pleased with it.
These videos are invaluable
Hi. Love your videos! While fixing the window regulator I put the door lock cable wrong and closed the door. Now the lock doesnt turn to unlock and I cant open the door. I know silly but I did it. How can I get inside where the cables are with the door closed? Can I pull the door panel off with the door closed? If I take out the windows controls thing… would I be able to stick my hand inside enough to reach the cables and try to unlock the door? Any advice would be greatly appreciated… thank you!!