This video will show you how to change the motorcycle chain and front and rear sprockets on a 2003 Honda Shadow Spirit VT750. This includes a sprocket mod, i…
This video will show you how to change the motorcycle chain and front and rear sprockets on a 2003 Honda Shadow Spirit VT750. This includes a sprocket mod, i…
You must be logged in to post a comment.
){kind=link}
+nothingbatter2do +Tim Downing It was a while ago, I don’t remember. I just
searched for the stuff on ebay
Great video so you bought all the parts on ebay, I know its been a while
but do you remember the seller? I would love to do it to my bike as it has
like 3 in slack and I can’t ride it until I change it. Thanks
Awesome video thanks for the post I also did this mod but cut the old chain
off with a grinder and cutting wheel took 30 seconds
excellente vid & well done!! do u have the link or links where u got your
parts by chance? m/m/
see my comment above
No noticeable difference for me
@sonny202 Got the chain and sprockets on ebay
@zaraa03 hey hows the clip type chain master link doohicky holding up?. i
got a new chain for mine but i got the rivet type. dont have a riveter so i
got the clip type was thinking about throwing a tack weld on the clip to
keep it from falling off
@itsd4real Bought everything on ebay.
ok I’m only running into 1 problem, it seems that my chain is a link short
but the chain I bought is a 525-120. I see that in your video it was about
a link short to begin with so, how did you get it to fit?
I found my 38 tooth sprocket on ebay. It affects the low end a little bit
but nothing really noticeable.
does the gear mod have an effect on the top end torque or low end torque?
@spidez8407 Haven’t had any problems with the clip. If you install it
right, it shouldn’t come off at all.
Is that going to effect my Top end speed or the git up and go?
great work, thanks. very much informative.
Great vid! Using it as a step-by-step guide.
vt 750 got rivet chain right. the manual said we gotta put the rivet master
link but u had the clip master link. is there any difference
And I’m changing the chain on a 2002 Honda shadow ACE Deluxe
Good stuff man, the only thing I’m skeptical about is the clip style master
link. I’m going to be changing out my 3rd chain on my VLX soon so I gotta
change out the sprockets too. How is the power at low speed, and hows the
rpm at high speed? I got 54,000 miles on a 600cc and it’s obvious enough
that I ride my bikes ALOT. lol My other one is a C50 Boulevard…..
Great video dude!
Got everything on ebay. Everything still works great
@jks728 It’s definitely less buzzy at 65-70 mph but it’s not a gigantic
difference. Not a lot of loss on the low end. The stand is just a regular
rear stand that I bought used from a motorcycle gear store.
I got mine on ebay, so far no issues with the chain or clip link.
How does this affect gas mileage?
awesome video sir …..thanks for posting….
You make this seem real easy! I think I may end up doing this because like
you said I’m always looking for 6th gear! lol…..thanks
Thanks for the great tutorial on how to do this!
A couple of hours.
@king-how many links was the chain that you installed? if you have too many
links on a smaller sprocket, it will be way too loose even with the chain
slack adjusters as tight as they will go
I pulled them in all the way to where the axle is all the way fwd. I still
have the stock sprokets on. Rear has 41 teeth and the front has 17 teeth.
Do I need to change these?
Thanks a lot. A very good audio and video guidance.
im an inspired new rider, and i really appreciate people teaching other
people how to do mods. good on you… and now i know what to do. thanx.
I’m happy the way it is. I like that it’s not quite as loud and vibrating
as the stock. But I didn’t want to lose too much on the low end with 37
teeth. Personal preference I guess
Excellent Vid!