DISCLAIMER: I am not held responsible that you mess up on, this should just be used as a guide. If you have no knowledge in any electrical, I’d suggest so…
DIY 2013 2014 2015 Honda Accord Footwell LED Installation
33
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
Hello sir, I been watching your videos and i changed my leds, i put hid as
well thanks to you, and i wanted to put this footwell lights in my accord
sport but i have no electrical experience, since i didn’t want to risk it i
went to honda dealer to put them that this was expense and i can barely see
it, can you help me making it brighter? thank you again!
i boght these from amazon i want to connect with headlight on off. can u
tell me where i need to get the connection because its different then yours
http://www.amazon.com/gp/aw/d/B00I93BOZ0/ref=mp_s_a_1_11?qid=1415858615&sr=8-11&pi=AC_SX110_SY165_QL70
In a sedan, how would we do footwell led in the rear ?
I wanna see a video of how your led strip’s are mounted under both driver
and passenger footwell floorboards.
Is this setup identical to the oem interior illumination kit in mechanics?
Hey jephu how do I wire my LEDs so they turn on with the dome light with
these? Is there a fuse for it?
http://www.amazon.com/gp/aw/d/B001QRSBW0?pc_redir=1401068680&robot_redir=1
Question what happens if the far left pin does not give any power? and you
are forced to plug it into the 2nd to left pin to draw power
thanks for the video. i have a question. for both of my led strip. do i
connect both negative wire (one for each led strip) to one d sub connector
and plug it in? if so, do i do the same thing for the positive wire? please
clarify if you can.
So the lights will be on while driving with the headlights on and off while
driving with the head lights off?
can you explain to me how did you get the wire on to the passenger side?
how did you run it?
If you wire it to the dome light and have the dome light switched to off,
will the LEDs still fade on and off ?
Can you modify the rear bumper reflectors into brake lights?
hey Jephu, thanks for the tutorial man. One question, I have a sedan, and
if I want to have the led installed behind the driver and passenger seats,
could I just tap into the current wires that is hooked up to the pins?
Thanks.
Will the LEDS turn on when you trigger the keyless entry? I was thinking
that it would be cool to run some wires outside of the car (possibly
through the firewall) and attach some strips along the bottom of the car
near the door. This would provide some extra lighting when walking to the
car at night. You might even be able to put some bulbs behind the door
handles too.
great job – what is the part number for the Radio Shack pins
i Spent $7 and did all this in like 15 min. Just connect the negative to a
ground and the positive to the headlight fuse. Mine only turn on with my
headlights which makes sense cuz theyre pointless during the day
How does this work with the door sill trim? Isn’t the plug that you removed
for that?