Oil Pressure Sensor Replacement – Chevy/GMC 5.3L, 4.8L, 6.0L

Oil Pressure Sensor Replacement – Chevy/GMC 5.3L, 4.8L, 6.0L

Chevy and GMC trucks, SUVs, and cars from the late 90s through the late 2000s have a common issue with the oil pressure sensor resulting in a check engine light and/or low oil pressure warning light. In this video, we show you the step-by-step replacement procedure for the engine oil pressure sensor.

https://gotech.com/learn/how-to/replace-gm-v8-oil-pressure-sensor

0:00 Intro
0:41 Tools required
1:09 Remove engine cover
1:22 Unplug connector
1:35 Remove old sensor
1:43 Inspect oil pressure sensor screen
2:30 Check new sensor for washer and thread sealer
2:36 Install new sensor
2:40 Torque to 22 Ft lbs.
3:03 Plug sensor in
3:10 Start engine and inspect for leaks
3:26 Summary

259
Like
Save


Comments

Dependable Auto Truck says:

good job thanks have changed several of them

Павелко Євген says:

❤Only for fans over 18 year⤵️ Alles sehr schön. Aber zuerst zusammen die Nummern 10 und 1. Eine emprutt.ONLINE Brünette und eine andere Blondine. Es wäre unfair, wennp ich 4 wählen würde

Ff Xg says:

❤Only for fans over 18 year⤵️ Alles sehr schön. Aber zuerst zusammen die Nummern 10 und 1. Eine emprutt.ONLINE Brünette und eine andere Blondine. Es wäre unfair, wennz ich 4 wählen würde

terry harvey says:

Any time you have a threaded shaft with a hole in the middle, torque to spec is a got to do. The 2 types of things I make sure to torque are brake caliper banjo bolts and pressure sensors. Neither of these do you want to leak or break.When I hit 70 years old {72 now}, I started loosing some muscle mass, so now to be sure I'm tight enough, I torque damn near everything. WHICH MAY BE A GOOD THING. {That I torque everything, not the getting old part, that sucks}

Ahmed Aossa says:

Alles sehr schön. Aber zuerst zusammen die Nummern 10 und 1. Eine warmthh.Online Brünette und eine anderev Blondine. Es wäre unfair, wenn ich 4 wählen würde

james bergfeld says:

I did mine a month ago in cleaned surface with brake clean and air before removal.

Bill Rimmer says:

Always like your vids Mike!!

William Wilkes,Jr. says:

Great info as always Mike. I happen to have a 6.2 L GMC. Thanks for all you do friend.

Eddie the Grouch says:

Timely and helpful. I need to do this soon and was not aware to look for a screen. With little room and doing the job by feel – that alone might have led to a fail.
Thanks a bunch!

Greg Bell says:

Very basic common knowledge for a "GOOD" mechanic as are "General Messes" AFM system that was a failure I just do a delete for them, just one of GM's laundry list of problems!

Ben Jaden says:

❤Only for fans over 18 year⤵️ Alles sehr schön. Aber zuerst zusammen die Nummern 10 und 1. Eine sleepfriendd.Online Brünette und eine andere Blondine. Es wäre unfair, wenns ich 4 wählen würde

Moose Mobile Auto Repair says:

Hi Mike, I hope you're doing well. Thanks for the informative video.

Comments are disabled for this post.