http://www.1aauto.com/1A/BrakePadAndRotorKits/Chevy/Silverado 1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading…
http://www.1aauto.com/1A/BrakePadAndRotorKits/Chevy/Silverado 1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading…
You must be logged in to post a comment.
Your videos are appreciated greatly.
Excellent video. Thanks for your careful, well explained process. The brakes are done and work great.
The clips help hold the brake pads securely to the caliper. All of them should be used, if not it could create a dangerous situation.1aauto.com 888-844-3393
I have a question about the clips mounted on the caliper housing that you scrubed with the wire brush. When I did the front brakes and rotors on my 1999 2500 I could not get the new pads on with both clips
. I had to remove the bottom clip to get the pads to sit in correctly. Can I drive like this? Do i need both clips?
Well, finally got started on my 99 Silverado 1500… and I had to go out and get a Star drive socket, it doesn’t use a 18mm bolt.. The rotor doesn’t have those holes for a 10m bolt.. guess a hammer will work..
i’m changing my pads tomorrow on my ’03 Tahoe. As far I see it’s really similar. Only difference on mine : the scew for the calliper are T55 torx.
It should be the same if not very similar. We carry some great brake rotor and pad kits for your 2003 GMC 1500 on our website 1aauto.com 888-844-3393
I am having the same issues. I have a 2003 GMC 1500 and I cannot find a good video to help me out for changing brakes and rotors. I am assuming that it is the same.
This video will show you the basics. You should be able to apply it to your truck. youtube.com/watch?feature=player_embedded&v=2FbX9AU3Jz0
am I the only one having trouble finding a good video on replacing the brakes and rotors on the 99+ Chevy Silverado 1500 ?… I love these 1aauto vids but haven’t found the one I need though I assume the 2500 is similiar
You may want to check the calipers to see if they are working correctly. You could also try bleeding the brakes if the pedal doesn’t seem to feel right to you.
i just replaced front brakes, wheel hubs and left front rotor on 1500 gmc sierra brakes are hot after driving what now
No problem at all. Have a great day!
Thanks so much for the help. Found out when my dad did my brakes he didn’t tourqe down the caliper bolts that hold it to the rotor. One was completey missing and that what was causing the chattering. When brakes were being pushed it couldn’t grip the rotor properly and was vibrating back and forth cause it was loose with the missing bolt. Thanks so much again and ur vids or A+.
It sounds as though the inner pad might not have been seating properly against the rotor when the brakes were applied. You may want to check the caliper to see if it’s working correctly and inspect the brake pads to see if they have worn correctly. Hope this helps you out.
I am in the process of replacing the front pads, turning the rotors, and repacking the bearings on my 1996 Chevy C1500. On the inside surface of the driver’s side rotor, there is a circular ridge of rust and pitting but not along the outer edges of the rotor as I would have expected. It is about halfway between the outer and inner edges, running all the way around. Is there a likely reason for this? The other side was fine along with both sides of the other rotor.
The process should be fairly similar if it isn’t the same.
I would check out the brakes and also the wheel bearings to see if they need to be replaced. You should also inspect the steering stabilizer bars and also the tie rod ends to see if they are worn. A chattering sounds like it could be in the brakes, but I’d also check out the other components mentioned. Hope this helps you out.
My truck started making a chattering in the front driver side wheel. I notice it would happen when I pressed the breaks lightly. Now it does it when I hit the gas and brakes. Any idea on what it is? Someone please help! 2003 silverado v6 4.3L
God Bless you! You just saved me $600 x 2 vehicles! Thank you so much.
God Bless you! You just saved me $600 x 2 vehicles! Thank you so much.
Will this video work for my 2002 chevy silverado 1500 2wd 4.8liter
Great video. You guys explain things very well…
Thanks alot God Bless
Not yet but we’ll get one of those trucks in here soon enough.
hi there love your videos you have any in 22R engines”
Great tnks!
Hey guys keep the video’s coming!!! especially the ones dealing with GM trucks!!!!