http://www.1aauto.com/1A/DoorLockActuators/Chevy/Trailblazer/1ADLA00005 1A Auto shows you how to repair, install, fix, change or replace a broken or snapped …
http://www.1aauto.com/1A/DoorLockActuators/Chevy/Trailblazer/1ADLA00005 1A Auto shows you how to repair, install, fix, change or replace a broken or snapped …
You must be logged in to post a comment.
Thank you for the explanation/response and all the excellent videos !!
If the door lock actuator fails or starts to fail, when you hit the switch it may make a noise and kind of wiggle but may not move up or down. That’s typically what happens to them when they go bad. It sounds like the latch could be bad in this case. If should hold the door shut. Hope this helps you out. Have a great day! 1aauto.com 888-844-3393
Could you take a moment to explain what the actuator does and what it doesn’t do when it fails ? My ’04 TB (LS) rear drivers side door will not stay latched – like what a broken return spring would cause to happen (I’m pretty sure there are no return springs – just an analogy), In other words, the handle operates the latch ok, theres just no resistance to hold the latch in place after it hits the bar. Pull on the door by its edges and the door opens right up – no door handle(s) needed.Thanks !!!
You may want to take the door panel off and see if something has become disconnected from the inside of the door that connects to the door key lock tumbler. Hope this helps you out. 1aauto.com 888-844-3393
I have a chevy malibu (2006) and I can’t unlock the car using the key from the outside. I’m pretty sure that this video explains the problem but is every lock actuator the same?
HI Don, I currently do not have a door lock actuator video on a 2004 Chevy Tahoe right now. We do carry a new replacement door lock actuator for your Tahoe on oue website 1aauto.com 888-844-3393
DO you happen to have a video on this procedure for a 2004 tahoe, drivers door???
You may want to have the dealer run your VIN # on the truck for you to see if your Chevy Trailblazer takes a different size.
The factory Valeo actuator is 3 plug. The replacement is only 2. Why is this?