Learn how to install a new battery in a GMC Acadia or Buick Enclave battery. We’ll show you how to replace/change/install with simple tips and tricks to help get you started!
Tool List: T20 Torx, 10mm wrench, 13mm wrench
-This video shows a 2016 GMC Acadia battery replacement.
-This video can also provide battery replacement guidance on model years 2007-present. The Group size H6 and H7 AGM battery are used depending on your trim level and year. The general install steps are the same though.
-Make sure you get the correct battery for your application! https://www.autobatteries.com/en-us/how-to-choose-your-car-battery-replacement/car-battery-group-size
-To learn more about AGM batteries, click here: https://www.autobatteries.com/en-us/battery-technology-types/absorbent-glass-mat-agm-battery
The use of a memory saving procedure will keep the vehicle’s computers memory’s alive during the battery replacement procedure. Referring to our Memory Saving video will provide you with various memory saving procedures that can be used according to vehicle manufacturer’s requirements. https://youtu.be/vSP3ShcaFgQ
Some late model vehicles must have the 12 volt battery registered with the vehicle’s Battery Control Module or Computer after replacement. See these videos on Battery registration and coding for more details on the procedures at https://youtu.be/TGKohKZHzr0 & https://youtu.be/cxOK_DczRGg
Although this video may provide you with the basic procedure for replacing your battery, we recommend that you check with the vehicle manufacture’s step by step procedures found in service/repair manuals for the vehicle you are working on.
Always wear safety glasses and gloves when working with or near batteries.
Great video
If the vent hose is not connected will that cause the battery to drain
Thanks, buddy! In and out with ease because of your video.
Thank you this is helpful!
Thank you for the video! It really helped me out with changing my battery today!
Thanks for the money saving video.
Thank you very much! Excellent video! I was able to easily replace my 2012 battery thanks to your video. Hardest part by far was lifting out the old battery. I had to sneak a rope under it to pull it out.
Any need for memory battery back up?
My acadia wouldn't start. I looked down in there where it holds the battery and it was full of water. Is that because maybe that vent hose came out or is there a bigger problem?
Thanks for keeping it short on the video.
How do I change the terminals?