Accessories include: switch board, running lights, scanner, interior glow, cb radio, truck bed lights, and amber warning lights. Wiring includes taking the c…
2011 GMC Sierra 1500 Accessories Install: Finished Product
5
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
Where did u get the switch boxes from?
I got both the switch panels and interior glow on amazon. The switch panels
were $10 each and the interior glow was about $35
You can see the vents from under the truck if you look up with a
flashlight. From there I just pushed some string through and fished the
wires ends up into the cab. I’d recommend you give yourself about 2 hours
to accomplish this, as it can be tricky the first time. Any more questions
just give me a shout!
Also what kinds of lights did you use for the interior glow?
How did you run the antenna wire from the console to the back? I been
wanting to do a cb radio to my sierra in the counsel also. Did you drill
the bottom of the console do run the wires? And for the antenna was there a
plug in the back wall that you ran the wire through or how did you do it?
Thanks
I drilled a hole right where there is a dip in the console interior floor
area. There is nothing on the other side of that wall and its thin plastic
so easy to drill through. To run the wires for the antennas, I ran the wire
from the console under the seat track, under the back seat rug, to the back
of the cab. From there, if you take out the rear seats (5 bolts, then lift
up to release not very hard) and pull back the back of the cab’s insulator
material there are vents on both sides of the cab