http://www.wellsve.com When a P0300 random misfire sets it can be difficult to find shich cylinder(s) are causing the issue. We show you how we did it on a G…
http://www.wellsve.com When a P0300 random misfire sets it can be difficult to find shich cylinder(s) are causing the issue. We show you how we did it on a G…
You must be logged in to post a comment.
Thank you for the great comment Chris!
I think GM was trying to remove as much weight as possible. Personally I feel this is not the place to do it. But I can understand it with all the pressures they get from government agencies. You are right be careful turning the screwws into the plastic.
Take Care,
Mark Hicks
Wells Vehicle Electronics
Couldn’t of Explained it Better 12500000 Thumbs Up I Have Seen This 6 Times in my shop My Question is What was GM thinking using Plastic For The Body of The Distributor ?? Warning if installing a cap n rotor on one of These Distributors Be Sure To Clean The Lock Tight off The Screws or the ears of the Distributor Body WILL Break off
thank you
What a great question! In fact I am just moving into a new shop and am planning to look for a light. I will be searching for a corded light. I have not seen a rechargeable I really like. I will let you know what light I choose.
Mark Hicks
Wells Vehicle Electronics
what work light would you recommend? rechargeable thanks
Thank you! Your kind words mean a lot to us!
Mark Hicks
Wells Vehicle Electronics
Excellent video
Siento que estoy teniendo dificultades para comprender. Si he entendido bien, el aire acondicionado no está activando. La primera cosa a comprobar es asegurarse de que el refrigerante está llena.
Mark Hicks
Wells Vehicle Electronics
ya le cambie el alternador y sigue la misma falla ahora lo ke note eske en boton ke activa el desempañador se calienta mucho y empiesa a bajar el voltaje hasya 12.6 esto puede durar 5 munutos a 10 maximo en lo ke baja de ahi se apaga x completo el tablero y aparece una leyenda ke dice hot AC disabled y se apaga el carro crees ke tenga ke ver algo con el aire acondicionado saludos…
Compruebe el alternador.
Mark Hicks
Wells Vehicle Electronics
hola tengo un olsmobile royal 1994 en el tablero marca un voltaje de 13.5 en hasta 14.2 bajando de 13 el carro empiesa a fallar y se apaga me podrias desir ke falla puede tener te lo agradeceria saludos
Cleaning the cap and rotor may not be enough, you might have to replace them. Be sure to also check the ignition wires. The next step is to consider the fuel system. It is common for the fuel pressure regulator to fail on your vehicle.
Mark Hicks
Wells Vehicle Electronics
Great video I have a 95 tacoma with similar issues2.4 ,the truck slight miss at idle Aldo at low speed acceleration feels sluggish & hesitant,,,no ce code or light on , I cleaned maf, new plugs, cleaned throttle body,o2sensors cleaned, air filter cleaned ,brand new plugs I cleaned the rotor / dist cap & still runs sluggish please help
Thank you Brandon means a lot to me!
Mark Hicks
Wells Vehicle Electronics
Recently subscribed and I’m really enjoying your videos. I like your video editing
Thanks for the kind words. I checked out Dan’s channel, he does a great job! Thanks for the suggestion.
Mark Hicks
Wells Vehicle Electronics
Nice video Mr. Hicks, I have a subscription recommendation for you, Daniel Sullivan’s electrical diagnostics channel. Check it out.
Greetings Malisa! Thank you for the kind words. When we started this project it was a real challenge to figure out how we were going to get the message of moisture and ozone across. Your comment could not be more satisfying to us.
Mark Hicks
Wells Vehicle Electronics
Hey Eric! A comment like this coming from you I feel humbled. Thank you it means a lot to us! When you come up to visit the next I will make sure you will fit inside the cap 🙂 Talk with you soon my friend,
Mark Hicks
Wells Vehicle Electronics
Thank you for the kind words. It was a lot of fun putting it together too. Stay tuned we have some cool stuff coming in the future.
Your comment truly means a lot to us!
Mark Hicks
Wells Vehicle Electronics
The explanations along with the visuals re Awesome! That view from the indie of a working ignition system is Awesome! Thanks for a awesome video..
Nice video! I wish I could fit inside my distributor cap.
great video and it was very good understanding how moisture and ozone are made inside the distributor cap. Greetings from Serbia, Europe.
Thanks for the kind words, they truly mean a lot to us!
Mark Hicks
Wells Vehicle Electronics
Great video. Enjoyed hearing great info. Will continue to monitor your videos, Thank you very much.
Thank you George! Always like hearing from you too! We truly appreciate your support.
Mark Hicks
Wells Vehicle Electronics
thanks for the video, always like these
Hey thanks felplay! Always nice to hear from you.
Take Care my friend,
Mark Hicks
Wells Vehicle Electronics
Thanks! I miss you guys too! Glad you liked the video.
Mark Hicks
Wells Vehicle Electronics
Thank for the video Mark, and very good explanation ending po300 could be ignition, fuel or mechanical issue. I will keep it in my mind.
NICE!!!!!!!!!! MISSED YOU!!!
I will always be here. Sorry for the delay. I do a lot of stuff for Wells and our customers we don’t post on YouTube. Hope you liked this one. It was a blast to put together.
Mark Hicks
Wells Vehicle Electronics
Was startin to wonder if you were ever gonna upload any more videos 🙂