***EDIT: Seach http://www.rostra.com/ for your car to see if you just need a new stalk like mine, or a whole add-on module.
I apologize in advance for the jiggle-cam.
Cheap ‘Stock’ aftermarket cruise control for your GM/Chev vehicle. My truck is a 2003 Sierra 1500 base model, but this -should- work for many 1998-2007 models of Chev and GMC, Envoy’s, Yukon’s, Silerado’s, etc, and other vehicles of the same series. Let me know if this exploit works for you!! Get out there and experiment!!
Tools required:
-Common sense
-10mm socket
-T25 Ball-end OR T20 and T25 Torx drivers
-Electrical contact cleaner
This makes sense; a lot of software and electronic things, clothes washers, cameras, etc, are produced the same way, with features present, but disabled/hidden in firmware.
Why would they reprogram the ECU differently rather than a single interchangeable unit? Same goes for the wiring harness.
By the way, I’m not responsible if your ECM somehow gets fried… I’m just a guy on the internet.
What year and model is the truck in the video ? Do you have the wiring diagram for those of us that don't have the 4 pin coupler ? I have an '06 2500 HD WT .
thanks a lot!!!
I too started screaming with joy when my cruis control turned on !!!
Tried doing this on a 2006 express van. Have the multi switch in and fuse in the cc spot but no cruise working. Never lights up. Any ideas or where to look? I’ve tried forum surfing and found very little info on vans.
Great video thanks. As an FYI, I have an '05 Sierra 2500HD work truck and the plug for the cruise control was not in the harness. I also had to take the steering wheel off to get to the second torqs bolt
I Installed it bought a brand new control AC delco and everything went fine till I went to put in fuse there is no place for power put fuse in every hole available anyone can you help
Hopefully this works on my 97 chevrolet c3500 1ton short bus camper. 6.5L V8 turbo diesel
I’m going to try it thanks
What fuse did you replace?
Thanks great video trying it tomorrow
Z zz r t.h5&heD by he C why t by gas h
My truck was same as your but it didn't work I wonder if mine is missing something else sinse its a basic model
EXCELLENT INFORMATION! THANKS for posting this!!
Finally someone that had the same issue my truck didn't come with cruise control I'm about to add it I just needed to know if I needed something else
great job bud. ive been looking at this most of the day, i couldnt figure out if i needed the cruise control module or not but my truck is almost identical to yours so you answered my question, thanks bud i do appreciate it!!!
Thank you friend from kuwait I couldn’t have done it without your post.
Thank allah then thank you body
any know if this will work on 06 chevy express 2500 4.8 vans
Good job! I installed the cruise on my 2003 express, STILL WONT WORK please if anyone knows where the fuse is on that van please let me know! It’s not in the manual.
I work at a wrecking yard, I’m pulling a cruise stalk off one of the Silverados Monday. This is great man, thank you’
Thank you so much for this video, man. Great job!
I have an 01 Silverado work truck I wonder if this would work on it also.
Cobalt? would this work?
you failed to mention this apparently only works for V8. based off several forums Ive read, its not plug and play or as simple if you have the dreaded 4.3L V6 🙁
Cool video. Now swap in a 2500hd instrument cluster so you can have the transmission temperature gauge.
thanks for the detailed video! worked for my 05 silverado 2500hd too! crazy laughter ha ha ha ha!!!!
Cost me $13 to add it this way! Thanks! My fuse block even had the fuse already