Buy Now!
New Mirror from 1AAuto.com http://1aau.to/ia/1AMRE02529
This video shows you how to install the driver’s side mirror but the procedure will be the same on either side of your 2007-2013 When it comes to driving, it’s important to know what’s behind you and beside you. A broken side view mirror could put you at risk of an accident, or ticket! TRQ side view mirrors are engineered to fit your vehicle. Chevrolet Silverado.
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
Tools you will need:
• 10mm Socket http://1aau.to/oaFW/1AXAA00017
• 7mm Socket http://1aau.to/oaFW/1AXAA00017
• Trim Tool Set http://1aau.to/oQW/1AXXX00006
• 1/4 Inch Ratchet http://1aau.to/oaFW/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/oaVk/1AXAA00015
• Gloves http://1aau.to/osC/1AXSS00048
• Safety Glasses http://1aau.to/onE/1AXAA00343
• Pick http://1aau.to/oBh/1AXAA00037
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Hardest part is swapping the custom covers from the old mirror to the new mirror. The tabs are really easy to break.
all in less than 9 minutes. bravo
I just did this ALL BY MYSELF! (62 year young great grandma!). Thank you for this video! I’m so glad I didn’t have to tell anyone I hit the garage door and smashed the rear view mirror!
I just bought these to replace on my 2008 chevy and the RH Mirror dont sit flush on the door i dont know whats wrong… i compared it to the original one and it seems that the one i recieved has the metal part of the mirror sticking out about 1/2in and that prevents it from mounting flush. I will contact customer service first thing tomorrow morning
Great video, super helpful. I replaced both my mirrors in about 1.5 hours. You don't need to completely remove the vapor barrier and mine just stuck back on easily.
They post a' How to do It yourself video, then GHOST everyone who asked questions about the process, I Unsubscribed moving on to Channels that will reply.
If my mirrors are non-powered do I still need to take the door panel off? Thanks
Thanks. Your videos are top notch.
You can do all of this without taking off the door panel completely… just let it hang off a little bit..
Love how they make it look so easy. That little quarter panel was a pain to get off and the was really stuck in there also.
Would t his be the same process for the right side?
I installed them. But, now when i put it in reverse the passenger mirror wanders around. Would be fine but when i put it back into drive it dont return to its original spot. Suggestions?
Do you all have the side mirrors with the 10 LEDs in the turn signal? I have an 09 avalanche ltz with the turn sgnal on the light that has more leds than that one
In regards to the white vapor barrier, were you able to reuse the Butyl Tape when putting it back on or did you have to replace that? Thanks.
Does anyone know how to retrieve that top nut he dropped into the door frame? The same exact thing happened to me. He never acknowledged it and magically had it afterward to install the new one.
Does this work the same with the 2007 avalanche or is it different?