How to replace a Fuel Filter – GM Fuel Filter

How to replace a Fuel Filter – GM Fuel Filter

Looking to replace your fuel filter? Is your car’s MPG decreasing? Is your idle maybe a little rough? Well one of the easiest fixes is your fuel filter. This car is about 180k miles and its the first time the fuel filter has been changed.

Jump to…
Take Off Old Filter (Nut): 2:26
Take Off Old Filter (Clip): 3:14
Put on New Filter (Nut): 5:25
Put on New Filter (Clip): 5:02
Prime the Pump: 6:02
Hear the Fuel Pump: 6:07, 6:16, 6:23
Start it Back Up! 6:30

Watch me Slice Open the Fuel Filter in a Different Video!
Coming Soon

Get the parts here:
Fuel Filter: http://amzn.to/2k4hNIg ($12.39)
Wrenches: http://amzn.to/2jS8VmU ($24.99)
Work Light: http://amzn.to/2kk3KMn ($66.11)
Needle Nose Pliers: http://amzn.to/2ktuQno ($5.97)
Drip Pan: http://amzn.to/2k0wLyC ($14.85)

Other Make and Models that this Video Applies to…
Buick Century
Buick Lacrosse
Buick LeSabre
Buick Park
Buick Regal
Buick Skylark
Cadillac CTS
Cadillac Deville
Chevrolet Expresse
Chevrolet Monte Carlo
Chevrolet Cavalier
Some GMC Sedans
Some Oldsmobile Sedans
Some Pontiac Sedans

—————————
Chevrolet Lumina Owner… check this out:
https://www.youtube.com/playlist?list=PLBswVpqDrWxS5gWH6NyI4i9o-wRLztOCu

BMW E36 ownder… check this out:
https://www.youtube.com/playlist?list=PLBswVpqDrWxTdr3dTAiUbxFVYhqyYIi_z

Toyota 4Runner owner… check this out:
https://www.youtube.com/playlist?list=PLBswVpqDrWxQ-uW1ScaP6qUE0NNdyZf-O
—————————

—————————
Check out these other Awesome Youtubers who do Car Repair:
ChrisFix (Great Quality Vids): https://www.youtube.com/user/PaintballOO7
EricTheCarGuy (Loads of Tips and Info): https://www.youtube.com/user/EricTheCarGuy
Scotty Kilmer(Funny and Straight to the Point): https://www.youtube.com/user/scottykilmer
Humble Mechanic (Great VW Tips): https://www.youtube.com/user/HumbleMechanic
BleepinJeep (Hilarious Personality and Great Jeep Tips): https://www.youtube.com/user/bleepinjeep
—————————–

Amazon – http://amzn.to/2gP8NoM
Ehost Website Builder – http://track.ehost.com/57e925630be8c/click

Disclaimer: Each video that is produced and published is intended to be educational. Tips and tricks will be offered for your viewership. The outcome of your car repair is solely your responsibility. Research and a good thought process should be completed before each repair.

99,855
Like
Save


Comments

Alan H says:

Good video. My 97 Lumina is metric. The filter is 20mm and the line is 16mm.

dave marco says:

I followed your instructions on my 1996 Buick Regal and thanks to you, it was a 'walk in the park'! Thank you so much for posting. I thought I needed a new fuel pump, but the filter was just super dirty. I'm going to hold off on the pump replacement. It might not need it now. Thanks again!

Blankman J5 says:

Full tank of gas

BIG tzonez says:

NICE VIDEO..FORREALS!

Morgan Berlin says:

Do you have to pull the fuel filter fuse before you do this

am2boni says:

Thanks for the video. Appreciate your help! God bless and Carry On!!!

Grant P says:

Great video here, and gives me an idea what my 97 Lumina gas filter
looks like. My car only has 60,000 miles on it, so it should be ok still,
or maybe needs changing. I was surprised filters just have paper in
them, as shown in your other video.

Just wondering if your located in the Southern US, like California, or
Texas, as the underside of your Lumina looks OK for rust – not too bad
at all.

I have a 2001 Olds Aurora, and I'm thinking of changing the filter, and
I think I should let the shop do it, as I'm not that handy like you are.

Dillon Cannon says:

Now is this the same setup on a 99 park avenue?

Karl Webb says:

I do assembly for GM. Those wrenches should be metric.

Patrick PhippsPA says:

Thank you Sir! Just did this today on a 2000 Cavalier. I might recommend a couple of things: 1) Hit the fittings with PB Blaster or some form of penetrating oil a day or two before, but certainly the night before; 2) I removed the fuel pump relay under the hood and tried to start it about 4 times to reduce the built up pressure in the lines; 3) I used tubing wrenches to remove so as not to dog ear the nuts (I had both metric and SAE wrenches); 4) I used two wraps of Teflon tape on the threads of the fuel line to keep from having a leak. Mine had 102K miles and was factory original. The car was occasionally stumbling and I was in there to replace the original fuel pump. Preventatively, I prepared to change out the fuel filter with a Wix brand which I like and when I tried to blow through the old filter, it was nearly impossible. That poor old pump must have really struggled. Good lesson on just changing those things out every 20K or so. Thanks again.

Mark Stewart says:

Good video and helpful. I thought you are supposed to remove the fuel pump relay and run the car until it stalls from a lack of gas? Then remove the fuel filter? Might save you from getting soaked.

AutomationDnD says:

GREAT Video- … Short, Sweet & Direct… THANK YOU

lunarmoon1969 says:

25 seconds on the nut side, and 20 min on the clip…yes a jack helps.
Thanks for the video… very helpful!!!

John Ottosen says:

USE GLOVES !!!!! GAS CAUSES CANCER!!!!!!!!!!!!!! USE A FACE RESPIRATOR TOO!

Comments are disabled for this post.