Visit us at http://www.carandtruckremotes.com/ Keyless Entry Keyfob Programming Instructions for Buick, Cadillac, Chevy, GMC and Hummer.
Visit us at http://www.carandtruckremotes.com/ Keyless Entry Keyfob Programming Instructions for Buick, Cadillac, Chevy, GMC and Hummer.
You must be logged in to post a comment.
Huge help thank you so much!!
try it on trailblezer 2009 and Works ! Thank u !!
greeting from KSA 🙂
2008 hummer h3??? help***
The HHR remotes must be programmed by a dealer or an automotive locksmith.
Glad we could help. Please ‘like’ us on Facebook.
Thank you it worked awesome with my 2004 Trailblazer EXT V8
Thank you !
What about hhr
Yes, This programming will work with most H2 remotes.
what about hummer h2 ?
Can u use an 07 tahoe keypad for 06 tahoe
Unfortunately, the Chevy Colorado is one of those models that can only be programmed by a dealer or an automotive locksmith.
help me with chevrolet colorado Z71
Can you please help me.?!?! I just got a camaro z28 95 so can I program a 2010 camaro remote to it.?? Please tell me.?!?
Great video! This worked like a champ!
Can u watch my video and tell me if I’m doing something wrong or what might be going wrong and comment what u think? Thank.
No, 2008 Chevrolet Uplander key fob has to be programmed by your local dealer or a pro automotive locksmith.
This procedure will NOT work for the H3. That remote must be programmed by a dealer or a locksmith
Great. Glad to help
Have both remotes with you at time of programming. Put one down. At last step when you push lock/unlock on fob at same time and car responds then put that one down, pick up 2nd fob and push lock/unlock at the same time. Car will respond again. Then exit programming mode. Call us if you have any trouble and I can walk you through it. 866-690-4308
The Chevy HHR remote requires programming by a dealer or an automotive locksmith.
The chip to start the car has to be separately programmed to start the car by a dealer or an automotive locksmith.
Great! Glad we could help! Please ‘like’ us on Facebook.
I’m sorry we do not have a video available for that make and model.
any instructions on how to program a 96 grand cherokee key fob?
Awesome and helpful video. It worked
wow it worked beautiful, the remote is all set now for my Nissan maxima, but the engine wont start what should I do next? I am using a new control 2 in 1 flip key fob transponder keyless entry remote please help
what do you do for a 2007 chevy hhr? Please help!!
How can i program 2 FOB’s everytime i program one and go to do the other the first one stops working…
I recently got a 06 Hummer H3, the remote does not work what so ever, i put new batterys. still wouldnt work, i tried the steps you did, could not go into program mode. Need Help.
i just followed all the instructions for both of the remotes and still doesn’t work… what else should i do? i put new batteries to both controllers.
WIll this work o a Chevy Malibu (classic) 2008
will it work on a 1999 pontiac bonneville?
but you are 4 years old, do you even own a Chevy Uplander 2005?
Also, I want to add that the step where I had to hold down the lock and unlock button on my remote, it took almost a whole minute before it finally took the program.
Thanks so much for the video. Ever since I bought my 00′ silverado the keyless entry hasn’t worked, but thanks to ur video it now works perfectly.
thanks a lot it worked for me