In this video we show you how to connect a LOC to your factory GM Bose Subwoofer wires. It is the same for pretty much all GM SUV’s and Trucks with a Bose system. This will work for GMC, Chevrolet, and Cadillac. enjoy.
In this video we show you how to connect a LOC to your factory GM Bose Subwoofer wires. It is the same for pretty much all GM SUV’s and Trucks with a Bose system. This will work for GMC, Chevrolet, and Cadillac. enjoy.
Comments are disabled for this post.
){kind=link}
this only amps the factory sub? what if I have an extra amp and subwoofer? what would i need to do to get it all bumping?
Where do I run the ground to?
And it still clips like crazy!!! Why not get the low inputs before the amp?
Do you reconnect the plug you unconected?
Is it similar process for Chevy Trax 18' with a Bose system
I have a clarification question. Are the center console harness wires that are tapped into, the BOSE amp "input" wires (between the head unit and the amp)? or are they the BOSE amp "output" wires (between amp and existing speakers)?
I have a 2018 Chevy Tahoe LT what kind of harness would I need to hook up to the Bose amp in the rear of the vehicle would I need a T harness or a LOC converter for subs only???????
2018 tahoe lt just to add subs amp is in the back what t harness do I need or will a line out converter and if so which one ????????
What if you don’t have an subwoofer?
Do you have any videos of gm cars 2013 impala ltz with Bose
Does anyone else have issue with active noise cancellation after installing aftermarket sub & amp
Is this the same location for a 16 Acadia with Bose?
Grounding to AB module grnd location?
Thank you brother, helped ALOT! hope my 2021 HD2500 duramax is the same. Crap mine does not come apart the same
Can you do a video on the 2015-2020 Escalades to get a signal for a loc?
How do I contact you
where do you tap into power so the p wont stay on when vehicle is off
Thats crazy bc I connected to the sub in the rear of my Cadillac dts with bose
What crossover do you recommend
Pretty sure you just tapped into those wires using NASA standard requirements.
Ultra professional as always…
I thought the light colors in the front = positive.
Dark colors in the rear = positive?
You said the dark colors in the front are positive.
When I had found out an installer did that to my wires coming off the harness going to bose amp. There are way better ways to tap a wire without having to do as shown. WAGO and Posi-Taps/locks come to mind. Then you don't have to worry about the nasty hooey black crap left by electrical tape… at least here in Texas.
What about for a 2017 Yukon with Bose?