Thank you for visiting the Hot Rod Hospital YouTube channel! Hope this helped you out & you join us for future videos!
Thank you,
Chaney, HRH
———————
Contact Us!
Instagram: hotrodhospital
Email: hotrodhospitalshop@gmail.com
How To: Bypass a GM VATS System w/out the Original Key
191,531
Like
Save
){kind=link}
Comments
Comments are disabled for this post.
THANK YOU!!
I have no key at all and ring gone had to straight wire
Thank you!!!!!! Thank you so much, you are beyond a life saver!!
So, I'm guessing I will have to replace the tumbler thing first?
Oops came out wrong
Why is it so top secret of eat ohm worked for u…even the guy in the video..why?
Will this work on my 98 chevy 2500
will this work on a FBody 99 ?
Which resistor should I use I have a 96 Camaro I’m using 2.4k an that doesn’t work
All good ,but what if the decoder module is bad ? How do you trick the ECM to allow fuel injectors to work. All the timer 30hz and 50hz modules only work for 89 up, but vats came out in 86 !!
wouldnt taking starter relay out and probing said wires reveal resistance needed while cranking position?
Hey, you might want to have a link to get the kit at a website you have and affiliate account with.
Will that orange wire be black? I can't find a connector to an orange wire
Will this work on my 2003 suburban,having same issues,is it the same orange wire?
I want to THANK YOU !!!! Your video was spot on and so helpful.Thanks to you my 2000 pontiac firebird is up and running!!!
I know away with cutting wires
Hi im having trouble looking for the wires you're talking about with my Chevy Trailblazer LTZ 2003…Can you help please
Do you have a parts list?
what if the previous owner cut the white and purple cable instead of the orange cable? how do i fix this
Can you just. Check the resistor on the key .
And then fit correct one .
My key barrel . Turns on to start too far . And its dead .
If i let key turn slight back it cranks and starts
Hello, I have a 1997 Chevy lumina LS and I would like to know which GM Vats resistor chip would be the best for my car
You can test the resistance in the key with a multi meter to see what the ohms are, Lol
WHAT ARE THE VALUES OF THE 15 RESISTORS?
What diffrent ohms where in the kit? I live in sweden so we dont have these kits
Measure resistor on key. Then measure resistor. When find combination that equals key resistance, solder together . And install on car wires. Done
Mine runs for 3 seconds and shuts off
seems like a fun thing to do over a few beers. by the time you hit the correct one you are half hammered and really happy