If you have found this video helpful, and you wish to donate to me, follow this link!! its easy!!
https://paypal.me/aaronhinesauto?locale.x=en_US
Follow this channel on twitter for the latest content updates and weekly Automotive Tips!!
https://twitter.com/AutoHines?lang=en
In this video I describe the procedures and steps necessary to repair a loose steering column on a GM truck. These procedures And steps can be used for many GM vehicles. I also go through the tools and special tools you will need to have in order to make this repair. Please let me know what you think and if you do things a little bit differently I would like to hear about it. Please like and subscribe
){kind=link}
Nice video bro!
Ford tilt steering column take out and replace
Ford tilt steering column take out and replace
Any clue what time bolts are called somebody was off in my column and I am missing two of them and trying to get them
would this work on a 1988 GMC jimmy full size?
Thanks for sharing. On the way to HF for steering wheel tool kit I didn’t know that is available. I have to change the whole steer column because some one else has striped the shaft for my nut. Lucky I have another ole donner truck!!!☝️☝️
tnx helped a lot,,,,,,,,,,,,,,,,,,,,,,,,,great video,,,,,,,,,hint guys its a little frustrating procedure,,,especially the part for the high beams and if you have to align the ignition switch gear part,,,,but over all with the help of this videos and patience and a lot of bad words its doable,,,,,,,,,,
You're an angle thank you so much
I have all the parts removed cant get it off like shaft is holding it stuck
Hey bro my 90 Chevy Silverado column is really loose like you showed me video what is the dangerous if I can't get to that taken care of right away honey will it fall out come loose I work like 6 days a week I don't get off till it's dark souls connected me to get time to get the bat and go place to find all the special tool get back to me let me know thank you
Hey bro! Thanks from Ukraine!
Great video brother, thanks this video was alot of help. Very easy to follow and very informative. Time saver!
I'll just buy a working column
This is just to much work
good explanation. Thanks for making this video.
Great video but unless you enjoy doing this whole procedure, Lock tight is your friend. This is a pretty common problem, may as well do all you can to get it to last.
Dude this makes way more sense than 90% of the other videos.
How long does this process take?
Best video on the topic.
Nice video, well done. I’m really struggling with mine because my wiring is either short or stuck in steering column. I don’t seem to have enough wiring to give me the slack I need to remove the parts. I’ve struggled with it all day.
Hi
My problem is when I reassemble bearings with small ball did not sit right and when move wheel bearing comments out
Is there some retention clip etc to hold bearing in place ?