GM Battery Cable Installation Troubleshooting
GM Battery Cable Installation Troubleshooting
70,863
Like
Save
){kind=link}
- Tags:
battery, cable, installation, Troubleshooting
- Categories: GM
Comments
Comments are disabled for this post.
GM Battery Cable Installation Troubleshooting
Comments are disabled for this post.
I was wondering if I should cut them off. There you have it, OFF THEY SHALL GO!
Man I am so happy I found this video. Today was a disaster with my car not starting due to the battery covering on the negative cable. The funniest thing is I was going to order new coverings and thanks to you I changed my mind. Tomorrow I'm going to take the cover off and see if starting the car returns to being normal and report back to this thread.
Thanks man, I was going crazy trying to find out what my start problem. Been 5 days since I took those covers off and starts like a champ
If that was the problem how did it work fine for so many years? Just curious. I just serviced my plastic battery terminal hoods with dielectric grease and a wire brush clean them up nicely but they were corroded quite badly. Put new terminal bolts on both sides too
Very good this is a issue with lots of cars why don,t understand it thanks
Thanks!!!!!excellent problem solve gmc very poor design
Had same faults with my 2003 Tahoe. I was going to replace the entire cable. Not anymore. Just remove covers and replace the bolts.
You were shocked???
That cable is the stupidest thing GM ever came up with ,,they ran me crazy until I did what you had to do thanks for the video!!
Wow I've been stuck in a Walmart parking lot for a week now wondering what could be the problem I was about to pay for a diagnostic test and check all the fuses and relays. I'm going to remove them tomorrow.
Did you just cut them off? Any particular tool?
Omg you should saved my day!! Thank you !!! 03 tahoe. Wild goose chase. This was the issue!
Great video, it helped myself out alot and solved my problem. Just curious though, what is that make shift red cover you put on?