BRAND NEW no-non sense Cardone CV axles can be bought here http://www.amazon.com/gp/product/B000CFHCTA/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&camp=1789&creative=…
BRAND NEW no-non sense Cardone CV axles can be bought here http://www.amazon.com/gp/product/B000CFHCTA/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&camp=1789&creative=…
You must be logged in to post a comment.
){kind=link}
I have mitsubishi eclipse and what is going on that when im going 60-75 mph
my car starts to shake… But it only shakes when im accelerating on that
speed, if i dont press the gas pedal it stops shaking. Is it mean that i
have a bad cv axle? I know that the engine is ok cause it doesnt shake when
i rev it up
Everytime i turn right my car makes a ticking noise is it the cv boot or
the whole axle? Please help
Thank you for the info
What does it mean if the noise comes whether i’m turning right, left or
going straight? i don’t need to turn my wheel to hear a noise.
Great video :)
Great video man. Thank you! I kid you not, I was just wondering yesterday,
what CV stood for.
Question for you; what’s your thought’s /experiences with the quick boots
(split boots) for replacement. I replaced the shaft a year ago, and the
outer boot is already cracked open and grease everywhere. The shaft is
fine, just the boot is shot. Cheap eBay drive shaft.
Thanks for the video man!
I found a bad CV in my car tonight while doing some bearings. This video
confirmed and explained exactly what I needed to hear. Thanks. I just wish
it was a cheaper part. hah
pulling out a cotter pin like a boss lmao
Thanks bud!
haaaad to subscribe. simple yet for some reason engaging. thanks!
youre the best brian , i really have to thank you for all your time and
info you share
thanks a milion man
Great video! Thanks for explaining in such detail, now I know what they are
and what they do!
No more than 4hrs ago I asked myself, “what does ‘CV’ stand for? I always
thought the letters ‘CV’ stood for ‘Coughing Velma’..because of a
joint..(CV joint). Anyways, good video…glad I watched it –
Question: What’s your take on buying used parts (nothing electrical) off a
wrecked car for roughly 20% of what it cost everywhere else?
Great video! Thanx 🙂 a lot of good information
GREAT VIDEO ON THE CV JOINTS FOR TOYOTA
I WAS ABLE TO GET BOTH SIDES DONE AND ALL GREASE CLEANED-Up for $600.00
with a lifetime warranty parts and labor on Both sides
great video. I stumbled upon it because of a clicking noise that’s coming
from the front (FWD) when I turn left. the noise is coming from the right.
This sounds exactly like the issue described in the video, but all CV boots
are intact and no signs of grease leak anywhere. The boots have never been
replaced. It’s a 2005 Acura TL. There is some leakage around the Rack and
Pinion though. Any ideas what other things I can check that would make a
clicking noise when turning left and ONLY Left. The weird part is that the
noise goes away after driving for 10 minutes. To reproduce the car has to
sit in the cold for a few hours.
This Video was incredible man. It literally had everything you needed to
know. Learned a lot
Grt explaination
Time to check my CV. when I’m turning right it creates an annoying knocking
sound.thanks a lot!
BTW drag is for air resistance, CV’s have less ROLLING resistance. and if
you want a much easier way to test them, lock the wheels left and
accelerate. repeat for the right…. but if we tell people the easy way
then they can’t be overcharged at the mechanics right??
You mentioned when turning that power transfers to the side with the weight
how ever all stock differentials on any application put power to the dude
with the least resistance. And I’ve also heard then called trans axels
other then that watching this made Mr a lil more confident with what I’m
doing. Thanks
We have a 2003 Chevy Trailblazer (4WD). There is no popping or clicking
when turning but a sound that compares to that of a truck with mud tires on
the highway, a loud “whine”. When slowing to a stop there is a slight side
to side wobble that you can feel. Any ideas on what the problem is, or
where to start?
Thanks in advance,
GC
Your video had great information Brian, I’ve watched quite a few of your
videos and they are all a great help. I hope you don’t take offense with my
next comment, though. You mentioned countries where we dropped the atomic
bomb. We dropped two Abombs, One on Hiroshima and one on Nagasaki, both of
which are part of japan. We helped rebuild Germany, Japan and other
countries affected by the war. We’ve never dropped another A bomb on anyone
besides Japan. If I’ve offended you, I apologize..
What’s up Brian listen ur sharp bull . I checked mines nd they were going
bad I changed them the way u explained nd I have a 02 venture . That was a
plus cause I’ve changed my swaybar too rides smooth . Five ***** homie
wow brian you are awsome man………like the true and sincere way of
conveying knowlege to others…May God keep you healthy ,safe and Happy
forever.
your student
zia
Another thing I hate about FWD.
Excellent presentation. Explanation short, sharp & straight to the point.
Easy to understood theory & practical. Double thumbs up & a big thank you
to you for your very useful info & tips. I liked your way of tutorial, slow
& calm. You are Professor Genius Sir David Einstein of modern mechanical
engineers. (:-)
NIce video about cvjoints