The TS Performance Six Position Chip offers more power at the rear wheels than any other chip or downloader on the market. You can adjust between the 6 settings while driving by simply turning a knob mounted on the dash. No need to pull over and download a different setting while the competition passes you by.
NOTE: On the OBS style Fords the PCM is located as shown in the video. A 1997 F-250 has the PCM located BEHIND the emergency brake (you cannot see it inside the cab without removing the entire emergency brake pedal). You have to slide the PCM out through the front of the firewall in the engine compartment. You have to also remove the fender well screws and pry the fender well down to get the PCM out.
Watch us install a TS 6 position chip on an OBS Ford Powerstroke 7.3L. This is how to do the original body style install
Want a TS Performance 6 Position Chip? Order one Today!
https://www.thoroughbreddiesel.com/ts-6-position-chip/
► Check Out Our Other Install Videos Here: https://www.youtube.com/playlist?list=PLnxFEGfR52dhbBUrmZWnAuARh40MPZ-ED
► Check Out Our Other Ford Powerstroke Videos Here: https://www.youtube.com/playlist?list=PLnxFEGfR52dj0-DiSxFOeQJkwDBqgWLT4
★ Saving Diesel Lives! Check out our online store for performance products at: http://www.thoroughbreddiesel.com/
☎ Give us a call for FREE ADVICE: (866) 737-4966
Please remember to SUBSCRIBE, LIKE, and COMMENT if you like our videos! It really does help us out! Thx for the support.
https://www.youtube.com/c/thoroughbreddiesel?sub_confirmation=1
❤ Join our Diesel Community ❤
● FACEBOOK: http://www.facebook.com/Thoroughbreddiesel
● TWITTER: https://twitter.com/TbredDiesel
● INSTAGRAM: https://www.instagram.com/tbreddiesel/
● PINTEREST: https://www.pinterest.com/tbreddiesel/
● BLOG: http://www.dieseladdict.com/
● SNAPCHAT: tbred_diesel
Chapters
0:00 TS 6 Position Chip OBS Powerstroke
1:07 Parts
2:30 Wiring Installation
14:26 PCM Prep
17:38 Chip Installation
21:00 Testing
22:23 Switch Mounting
#tsperformance #6positionchip #powerstroke #thoroughbreddiesel
i cant stress it enoughwhen doing any electrical work always disconnect batteries people dont believe it till they break something
Great video and agree about chatty people on the comments. Going to install TS today. Thanks so much for the help!!
Mine won't start or run in the stock position just check engine light, high idle work and the other settings will run, just not the stock.
Should I re-coat the connector with new dielectric grease?
I won’t dispute that the battery needs to be disconnected. However, is it really necessary to disconnect both sides of the battery? I usually just disconnect both ground cables.
something has turned in here LOL
Ok so I'm having an issue that took me two months and 1000$ to figure out that my ts performance chip backed out. Any ideas on how to keep the chip from vibrating loose
Disconnect the cables!
Cant tell you how many people ive argued with over the years about the importance of disconnecting the Battery when not only working on any electrical stuff but, even more importantly when doing any Welding on a Vehicle. I've never seen it happen myself (Because I've always disconnected the battery for Welding) but, ive heard many stories of batteries exploding from welding on a vehicle with the battery still connected as well as burning up Computers and Fuse Boxes and all sorts of problems. But, people are hard headed and think if they did it once with the battery still connected then such advice doesn't apply anymore. You can do something wrong a bunch of times and nothing happen but, it only takes once of something going wrong to really screw something up major.
Haven’t watched this video yet, but I love the fact you straight up give your phone number for all the keyboard trolls out there! I also believe if anyone is not smart enough to disconnect the batteries, they can come on over and rewire this CJ that burned up from someone that wanted to adjust their alternator. I never leave comments but I had to give this guy a thumbs up, on the call out!
How many horse power does it make for the truck, great video, thanks.
Video was a huge help. My bolt for the wires to the pcm was stripped and still did it without unclipping wires. Great video
What a legend ! Mine was already installed on the truck I bought i just wanted to know where it plugged into haha. Great video
My ts6 chip I can’t feel a difference between the tunes but my high idle works but 140 and 50 there’s no difference
does anyone do a video installing a chip in a 7.3 E-250 heavy duty
I have a mp-8 on a 1997 international 4700 with 7.3 it was on there when I got the truck I don't know what any of the setting are or if it works was told to turn it all the way don't touch it the guy I got it from words any help I'd be grateful
Hell yes i like this feller lol call me thats write
I know this video is several years old now but what is your opinion on the TS-6 vs hydra on the OBS. I have a 96 with 85k on the clock. All stock set up, nothing changed. Don't need much but would like a little more towing power. Great video and just became a subscriber.
Just ordered one today Do you recommend getting a cold air intake as well or does stock intake get enough air?
Hello sir I absolutely love this product and your installation video. I put this chip on about two years ago and to make a long story short without knowing a lot about my 1997 2w Dr. F350 diesel 7.3 Powerstroke a local Aamco repair shop told me that the chip blow my PCM. I DIDNT believe them but I ended up purchasing a knew PCM anyway. Turns out those idiots at Aamco didn’t realize it was my speed sensor all along that was causing my Trucks erratic shifting behavior and and Towing light on my shifter flashing ,I put the chip in again yesterday and once again I absolutely love it, so just for reassurance for future use can this sensor blow my PCM ?I’m just asking this question for peace of mind.
I found it's a little bit easier to pull it from the inside all you have to do is take the park brake assembly off
I heard you could do the install from the inside, didnt know if this is true or not