How to replace U-Joints on a vehicle. Done on a ford truck but most other brands of cars and trucks use the same system.
How To Replace U-Joints
48
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
How to replace U-Joints on a vehicle. Done on a ford truck but most other brands of cars and trucks use the same system.
You must be logged in to post a comment.
No do it yourself er will learn anything from this video.
Great. Cant keep an arc going for shyt tho
Love the Miley song in the background bro.. aha
@natescamp Yeah any sign of the u joint going bad you need to go ahead and
replace it ive got a 93 explorer on 8 inches of lift and the axle dropped
out goin 60. NOT fun
Glad I could be of help!
how can i know if the u -joint needs to be replaced?. . does it squeaks
when u step on it less than 30mph and when u decreased the velocity less
than 30mph as well?
“since it leaks”
Good video BUT my favorite part was welding close to that can of butane!!!
PRICELESS
The closest thing I think of is that they might be something like nylon
locks? Does the new u joints come with some new rubber pins? If so you
might be able to melt the old nylon locks out. Don’t know if that’s what
you have but that’s the best I can come up with.
Hey can u tell me that i am having a problem that when i turn the car
extreme left some tuk tuk and clinking voice comes i dnt knw whether it is
axle problem or the u joints?can anyone help me and the voice come sometime
mostly 2 out of 5 time when i turn left 🙁
I haven’t ever welded a u joint. Never had to grind off any weld to get one
out either.
Hey Redd I have a 1999 ford ranger with a noise that I hear when I get on
the freeway. a friend metion to me that maybe its the drive line. the noise
is sounds more like a zoom noise. as I slow down to like 40 mph it goes
away. any clues.
u gotta get that gas tank fixed, its been leaking gas since ya got the truck
@natescamp When replacing the back universal joints where the yoke is. Do
you have to take the yoke off in order to replace the universal joints.
Answer soon please. Thank you.
You shouldn’t have to remove the yoke after you take the clips out you
should be able to take a socket and beat the u-joint over to one side of
the yoke remove the caps, using something to press them out is preferable
but theres nothing wrong with beating them out. After you got them out of
the yoke you should be able to pull the slip yoke out if you want to work
in nicer conditions, just make sure you put it back in in the exact same
orientation or you might get driveline vibrations.
Dude! you just helped me tremendously 🙂
ive done the ones that have c clamps but on my 05 checy avalance there not
c clams there little ruber pins and ive never seen them before how do u
remove them anyone know
Could be either wheel bearing or differential. If it changes when turning
hard wheel bearing, if noise changes when you let off throttle or get back
on to it could be diff. A place to start anyways.
@bosshogg013641 Ouch, I bet that hurt.
You’re doing it the hard and timely way
ya i havent got the new one yet but i looked at it and i scen they had
little white things on each side they liik yo be rubber and they stick out
about 2mm so u could probl pull them out with pliers but i have never scen
ones that didnt have c clamps so i was woundering if anyone has scene any
like that and if there is a special way to remove them or not
Never thought of that. Thanks for the advice.
@lowriderfan15 Yeah they could squeak, but their not too bad yet if their
squeaking. You’ll know there really bad when they start clunking.
Hammering out U-joint caps is not the right way. You can bend or distort
the driveshaft yoke. This guy has a nice big shop vice. Why not use it,
with a couple of sockets to press them out? This easier, safer and will not
damage anything.
thanks helped me a bunch
All 99 models an up chevy trucks have rubber clips from the factory just
take a torch and melt them out and the new u joints will have the clips
goes right back in like it should
Lol I had to watch the video twice just to find it!
Im lovin the miley cyrus haha
Hey buddy i have a 1993 gmc sierra c1500 and i was woundering if you had
the same as i? My truck accelarates fine and when taking of their is a
funny squeekee sound from the back and when taking my foot off the gas it
shivers or shakes bad would that be the U joints or could it be somthing
else? It was running awsome until like 3 weeks ago when it started to
shiver!!
Yeah… Someday I’ll end up blowing up….