How-to Replace Shift / Shifter Lever 1997 Ford F250

How-to Replace Shift / Shifter Lever 1997 Ford F250

This video will show you how to replace your shift / shifter lever with overdrive on a 1997 Ford F150, F250, F350, and others.



Shawn Robinson says:

I can't watch this crappy video

Don Kemp says:

I have a 1994 F-250 automatic 4 wheel drive/7.5 liter 460.3 speed overdrive on shift lever. Mine broke and I've done everything pretty much that I saw on the video. But the arm on the tube, I can't figure out how to mount. The bracket that that arm fits into to shift the gears. My book only shows the floor shifter not the column shifter. Also the videos truck was not 4 wheel drive and is a little different than mine. Mine only has 6 bolts instead of 8

xxxfoxbody says:

This looks nothing like a 1997 f250. Looks like 1998 or newer.

jesse james says:

if your light stays on what do you think it could be the light wont go out in my case so i cant shift into over drive

letsthinkitover1 says:

I hate this stuff I have four panels and covers off waiting to get a part the cable clip white that screws on is broken .two dealers very to busy for me and we're gonna call me back on parts. it is hot working under dash in the AZ sun.

dwayne0t says:

Hmmm. Seems like it would easier to just clip and splice the (3?) wires in that cable.
Thanx for the vid

earnest brown says:

Great Video, maybe the BEST I have ever seen on You Tube!

Mark Austin says:

Thanks for shooting this video. Very helpful.

spotted draft says:

Thank you good video ☺

skulledmonte84 says:

it's much easier to just take the 3 screws out of the bottom column panel to remove the key switch that way you can see that ball were you need to press it in for any one reading this make sure key is in the on position like said in the video

Paul Sosa says:

Man I really wanted to replace the torn boot but there are no after market replacements. Anything I found was dealer only and really expensive

Write a comment