Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/64/a4/shocks-and-struts
1A Auto shows you how to repair, install , fix, change or replace your rear shocks. This video is applicable to the 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 Ford Fiesta
🔧 List of tools used:
• 10mm Wrench http://1aau.to/opu/1AXAA00010
• 10mm Socket http://1aau.to/oVF/1AXAA00017
• 15mm Socket http://1aau.to/o4u/1AXAA00015
• 19mm Socket http://1aau.to/oro/1AXAA00043
• 1/2 Inch Breaker Bar http://1aau.to/okw/1AXAA00078
• Ratchet http://1aau.to/oaiR/1AXAA00016
• Socket Extensions http://1aau.to/o4u/1AXAA00015
• Torque Wrench http://1aau.to/ou9/1AXAA00044
• Rust Penetrant
• Floor Jack http://1aau.to/otk/1AXAA00068
• Jack Stands http://1aau.to/otz/1AXAA00065
For More Info visit us at http://1aau.to/h/beL/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Torque ft-lb
top: 18
bottom: 85
Awesome video thank you for your content!
Good video.
Without a lift, it's easier to do it if you remove the inner lining since you get easier access to the upper mount. But just removing the clips of the inner lining on either side of the shock works too.
Thanks again 1A auto! For a "professional" mechanic I find myself looking up an embarrassing amount of your videos. I'll definitely be purchasing your parts over rock auto whenever I can.
loool nice cut at 10:33 I've done that too many times.
Informative. Thanks
Replaced my rear shocks on my 2013 Ford Fiesta S, this video helped me immensely. Thank you so much
Great video, thank you!!!
Do the rear spring just fall out of the tension Is released while the lower shock bolts are out?
Swapping my springs to lowered HR supersports.
Just finished replacing the rear shocks on my 2011 fiesta. Thank you for this video!
I viewed this last night and changed both rear shocks first thing this morning. Great video with invaluable information. As I worked on my drive I jacked up the whole rear of the car on the axle beam then lowered it onto the jack stands which I had placed under the spring pans as I thought this was the best way of replicating the normal loading of the car prior to tightening up the lower bush bolts. Most grateful for the help this video provided and my son’s UK Fiesta is nice and silent over the bumps so he is delighted!
Fantastic! Thank you Sue and 1A!
Please make a video obout changing of cegarette lighter for fiesta 2012
Thanks great video just had my shocks done today!
Great job…!!! I learned a lot from this lady about this kind of job… Congratulations…!!!