How To Replace Neutral Safety Switch 97-03 Ford F150

How To Replace Neutral Safety Switch 97-03 Ford F150

Limited Time: Get $10 Off Your Order
https://1aau.to/m/YT-Email-10dollars-Off

Buy Now!
New Neutral Safety Switch (11 Pin) from 1AAuto.com http://1aau.to/ia/1AZNS00008

In the video, 1A Auto shows how to replace a faulty, shorted, misaligned, or broken neutral safety switch. The video is applicable to the 97, 98, 99, 00, 01, 02, 03 Ford F150 pickup truck.

🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/taim/1AXAA00013
• Pry Bar http://1aau.to/tcN/1AXAA00020
• 12mm Wrench http://1aau.to/tay/1AXAA00010
• 15mm Wrench http://1aau.to/tay/1AXAA00010
• 8mm Wrench http://1aau.to/tbQ/1AXAA00011
• 12mm Socket http://1aau.to/tZE/1AXAA00015
• 15mm Socket http://1aau.to/tZE/1AXAA00015
• 8mm Socket http://1aau.to/tLW/1AXAA00017
• Slip-Joint Pliers
• Ratchet http://1aau.to/tT3/1AXAA00016
• Socket Extensions http://1aau.to/tZE/1AXAA00015
• Paper Towels http://1aau.to/tgF/1AXSS00035
• Wire Brush http://1aau.to/tbU/1AXAA00079

For More Info visit us at http://1aau.to/h/aRG/

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

152,301
Like
Save


Comments

Fernando Saldana says:

I wonder if is the same on 2008 tundra I can't shift back to reverse or park only neutral and drive please help!!!

Chels Johnson says:

Is the 1999 ford 150 a 14 bolt or 20 bolt?

Kim Madison says:

Will this be the same procedures on a 2006 crown Vic lx

JAVY 1980 says:

we need more information .you just replaced it. what is it for?

pyro707 says:

Need this for 2006 Navigator. I'm unable to find the location of the Neutral safety switch.

Ruga Ryan Reactions says:

Is the transmission range sensor the same as the safety neutral switch?I have a 2007 Saturn aura xe 3.5L

Kevin Myers says:

I have an 02 sport Trac that the reverse lights don't work on. I've already replaced the bulbs and the fuse. I was told this could also be the culprit but I'm a skeptical person. So could this be it?

GHOZTPRODUCTIONZ says:

So when replacing this part your car must be in neutral

Barbatruco says:

new safety switch with old rusty bolts.

David Carter says:

Great video, thanks..

Don Keeling says:

How different is the 04 and up? F150 2 wheel drive.

Daniel Vega says:

Good god my expedition wasnt cranking everything seemed fine so i decided to try it on neutral and it turned on right away heard on the webs that this switch could cause it to not go into park properly so now im here and realizing i must have not put it into park all the way myself cause it works fine now goes into park good and everything talkin bout driver error here lol

Gr4ck3L says:

It took longer to get the truck in the air and watch this video than it did to replace the part. Thanks 1A for this quality how-to post!

Comments are disabled for this post.