Buy Now!
New Headlight from 1AAuto.com http://1aau.to/ia/1ALHL01515
1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped headlights. This video is applicable to the 08, 09, 10, 11, 12 Ford Escape
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/oXf/1AXAA00013
• Phillips Head Screwdriver http://1aau.to/oXf/1AXAA00013
• 10mm Socket http://1aau.to/oHT/1AXAA00017
• Trim Tool Set http://1aau.to/ojX/1AXXX00004
• Ratchet http://1aau.to/oYd/1AXAA00016
• Socket Extensions http://1aau.to/oMY/1AXAA00015
For More Info visit us at http://1aau.to/h/aGs/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Lot easier to just pop the hood and take the lights out of the engine area rather then taking the front end apart still a really useful video tho gonna use it to reattach my front end
Dear Ford: if you read this, please re-release the 2010 Escape XLT again, exactly as it was. Why must you people ruin good things?
This is NOT for anyone who just wants to change the headlight BULBS. That's about a five minute process and you do not have to take the entire vehicle apart. Plenty of other vids on here show it step by step.
Oh ya…You have to disassemble the front of the vehicle to change the headlight….Billiant Ford!!
Getting Rich off this are we?"
Idiots
Love the video and greatly appreciate you guys! However, if someone can't find their hood release latch, they should stop this video and not proceed with trying to replace the headlights 🙂
How about a video on how to replace the bulb of the headlight
Not me cussing the headlight out not knowing I had to take apart my whole front half…
2006 silverado is the easiest headlight ive ever had
Thanks for the video, and thank you Andy. I already had my bumper off to remove the fans (to get to the alternator connectors), so this was easy.
I hope the engineer that decided how this headlight should be replaced got fired. WTF???