Buy Now!
New CV Axle Shaft from 1AAuto.com http://1aau.to/ia/1AACV00119
1A Auto shows you how to repair, install, fix, change or replace broken, worn, or vibrating CV axles. This video is applicable to the 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, Ford Focus
🔧 List of tools used:
• Pry Bar http://1aau.to/te4/1AXAA00020
• 15mm Socket http://1aau.to/takn/1AXAA00015
• 19mm Socket http://1aau.to/tse/1AXAA00043
• 32mm Socket http://1aau.to/tJ/1AAST00003
• Locking Pliers http://1aau.to/tav/1AXAA00139
• 1/2 Inch Breaker Bar http://1aau.to/thP/1AXAA00078
• Ratchet http://1aau.to/taeg/1AXAA00016
• Socket Extensions http://1aau.to/takn/1AXAA00015
• Torque Wrench http://1aau.to/tqM/1AXAA00044
• Copper Anti-Seize
• Rust Penetrant
• Hammer http://1aau.to/ti7/1AXAA00091
For More Info visit us at http://1aau.to/h/bwx/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
Why on the one side you took off the lower control arm and then on the other side you went through the strut?
Wait a minute!!.. The passenger side removal is different then the drivers side.. Wouldn't it be the same on both sides??? 🙁
I found parts for my car on your site. Is the process the same on a 2013 Ford Fusion Hybrid? Any specific tool required?
What is a veericle?
I was dying when the trans fluid dumped on the ground.
mechanic terminology "light bonk! heavy bonk!!" its good 🙂 thanks for helping with my install.
This is great. any differences between ABS cars and non ABS? Is there an ABS ring that needs to be added or checked?
Camera man never heard of exposure lock?
I changed my axel and now car willnot go into reverse
len where can I buy a pair of those locking pliers you used in this video ? I like this type of jaws
Len have you ever seen the control arm tool its a amazing tool its by a company called simtools part number LCAT 6803 google it sometime they have videos on it on youtube check it out you will like it I did
Close to the end of the video when he was tightening the axle? He could have been remove the caliper and the rotor because at the end of the video he took everything off you should have done that the first part of the video so he wouldn't have to do it at the end of the operation process. But other then that great video. But also I see you installed a new rotorandd caliper installed but it was not showed in the video which is okay because it could have been took off anyway if you was to replace everything in that area