Car Fix DIY Videos

Buy Now!
New Drag Link from 1AAuto.com http://1aau.to/ia/1ASTE00466

This video shows you how to install a drag link on your 2008-2010 Ford F-250.

This process should be similar on the following vehicles:
2008 Ford F-250 Super Duty
2009 Ford F-250 Super Duty
2010 Ford F-250 Super Duty

Tools you will need:
• 16mm Wrench
• 17mm Wrench http://1aau.to/oMH/1AXAA00010
• 15mm Socket http://1aau.to/oa7z/1AXAA00015
• 18mm Socket http://1aau.to/o4K/1AXAA00043
• 22mm Socket http://1aau.to/omx/1AXAA00266
• 24mm Socket
• Pickle Fork
• Side Cutters
• 3/8 Inch Impact Gun
• Ratchet http://1aau.to/obiu/1AXAA00016
• Torque Wrench http://1aau.to/oaoS/1AXAA00044
• Gloves http://1aau.to/oCW/1AXSS00048
• Safety Glasses http://1aau.to/owF/1AXAA00343
• Hammer http://1aau.to/oMz/1AXAA00091

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.