Buy Now!
New Sway Bar Link from 1AAuto.com http://1aau.to/ic/1ASSL00003
In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the 01, 02, 03, 04, 05, 06, 07, 08, 09, 10 Ford Explorer Sport Trac.
🔧 List of tools used:
• 16mm Socket http://1aau.to/oaaX/1AXAA00015
• 18mm Socket http://1aau.to/otw/1AXAA00043
• Ratchet http://1aau.to/oass/1AXAA00016
• Rust Penetrant
• Floor Jack http://1aau.to/ovQ/1AXAA00068
• Jack Stands http://1aau.to/ov9/1AXAA00065
• Reciprocating Saw
For More Info visit us at http://1aau.to/h/buq/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Do I need to lift the vehicle to keep pressure off the links while changing or can I leave it on the ground to change them?
Thanks for your help
So its bad if thare both broke off
I am going to replace my upper control arm and ball joints as well as my sway bar links. Which should I start with?
The sway bar links are not connected to the control arm.
really good vid I found exactly what I needed and the how to I appreciate the effort you put in this
Great video, good attention to detail and safety. Excellent film shots of the procedure. Thank you.