http://www.1aauto.com/1A/-/Ford/Explorer 1A Auto shows you how to remove or replace the interior door panel trim on your vehicle. You need to remove the door…
http://www.1aauto.com/1A/-/Ford/Explorer 1A Auto shows you how to remove or replace the interior door panel trim on your vehicle. You need to remove the door…
You must be logged in to post a comment.
){kind=link}
We do not have an auto repair video for this particular auto repair. We’ll keep this request in mind in the event that we need to make this repair in the future. 1aauto.com 888-844-3393
how do you replace just the power door lock switch?
We currently do not carry entire door panels at this time.
Im looking through your site and I cant find a 96 ford explorer door panel. Mind linking me?
If there isn’t a screw holding the lens in place, you may need to remove the door panel.
How do i remove the step/courtesy light bulb in the door?
Check the wire harness between the door and body of the truck for broke or frayed wires. That could be causing the situation that your describing.
helllo i have a 98 ford explorer it has power windows and doors and a facrtory alarm i have 2 problems 1.the widows will not go down from drivers side or indivdualy 2. when i close the doors from the drivers side they close except for the drivers side which will close but will open up again and i cant find the valet switch pls need help much app
We currently do not have a video on this particular year. You should be able to apply some of the basics steps taken in this video to your car.
awesome… i have a 2002 explorer and i cant find anything on how to remove the door panel… and its not like the 01 model. if anybody could help me that would be great..
You could try that or you may need to make some type of bracket to secure it in place.
The clip that holds the switch cluster flush to the panel broke off and now the cluster moves inward and there is a gap between it and the panel, any way to fix this? Epoxy?
Great tutorial video! I will be doing some repair work on the DS window and replacing the speakers while I am in there. I was concerned that it would be overly complicated to get these panels off, thanks for showing me otherwise. I’m used to working on my 93 YJ, where everything is pretty straightforward. =D
Thanks for visiting us on YouTube. Have a great day! 1aauto.com 888-844-3393
I’m not so sure maybe i was thrown off by the design of the inside my panel is slightly different…also the window track is hand crank…maybe you just make it look easy haha
Thank you for this tutorial. :^)
I have to fix my wife’s 2000 Exploder’s outside mirror and was wondering how that panel was going to come apart.
The concept for the door panel is going to be exactly the same for power locks and non-power locks. The clips holding the panel on will be in the same spots and the bolts were be in the same location.
my door is non electric doesnt come apart the same way
If you have a 95-01 Ford Explorer, this video will show you how to remove it.
My door wont open from the inside or outside is this method going to work for opening the panel from the inside ?
We currently do not have a video of this particular repair but, they should come apart in a similar way.
thank you. it kind of feels like its rubbing on something though. like when i grab the lock and push and pull it up and down its not as smooth as the others.
It may be hard to do but this video will show you how to remove it, so that you can reach inside of the door and pop it open and fix what may be wrong with it.
It could be your door lock actuator that’s may be getting tired. We sell new replacement ones on our website 1aauto.com or call 888-844-3393 and our sales staff can help you out.
QUESTION: i have a 2000 explorer and my driver side door doesnt seem to unlock all the way when using keyless entry or the key. its obvious that the lock (small black thing) doesnt rise up all the way unless the door is opened from the inside… being the driver side door its really starting to be an inconvenience. it would be awesome if you can help
If it will not open from the outside or the inside, you may have to remove the door panel and unlock it from inside of the door. One of the rods may have fallen off of the handle or latch. Hope this helps you out.
You’re welcome. Have a great day.
1aauto your the best. I do handyman work on the side and vehicles are one of the many things that I do. You have made my job much more easier when I’m stuck in a bind. Your expertise and detail instruction videos are the best on the net. Your truly a life saver, because all vehicles are created different and your videos have never let me down. Thank you so much.
We currently do not carry that particular part. You may want to check the dealer or possibly your local salvage yard for one. Hope this helps you out.
I was wondering where you can find replacement door handle covers (the first thing you pry off at the beginning of the video) for a ’99 explorer.
Mine is a 94 the previous generation, but this gives me an idea. Thank you. I needed to remove the panel because my passenger door won’t open from the outside, so I’m assuming it has something to do with the rod