http://www.1aauto.com/1A/ACBypassPulley/Ford/Taurus/1AEPM00006 1A Auto shows you how to save big fixing an old automotive air conditioning system. Replacing …
How To Install Replace Air Conditioning Compressor Bypass Pulley Ford Taurus 92-03 1AAuto.com
151
Like
Save
){kind=link}
- Tags:
1AAuto.com, 9203, Bypass, Compressor, conditioning, Ford, Install, Pulley, replace, Taurus
- Categories: Ford
Comments
Write a comment
You must be logged in to post a comment.
Depending on how much room is between the bottom of the pan and the
chassis, you might have to lift the motor a little, if there’s not enough
room to remove the pan so that you can put a new gasket on it. 1aauto.com
888-844-3393
I need to change the rear oil seal on my 2002 ford F150, is this difficult,
for a shade tree mechanic? and what has to be done to do this
You may have to. If you follow the directions on the video you should be
okay. 1aauto.com 888-844-3393
I have a 2000 Taurus SES 3.0 v6, I bought the bypass pulley and it came
with a washer. do I need to put the washer on the pulley to enable the
serpentine belt to line up correctly?
Hello, I want to replace my AC unit all together with a new one… is the
procedure basically the same as the video above. Just remove the unit same
way and reverse everything to install it and then charge the AC system back
up.. or is there more to it then just that. This is the first comment I
ever made on your channel and i want to say i use it ALOT and have for a
few years but I dont know how to use youtube very well.. but i appreciate
you guys
I am not 100% sure about this car, but it looks the same as just about any
other vehicle. You may be able to save a lot of time and work by removing
it from underneath. I have done this successfully on a ford focus and an
olds cutlass ciera. You end up ONLY removing the compressor, so long as you
don’t mind getting all dirty. 😛
It depends on what is causing the A/C to blow warm air. It might just need
to be charged.
just wondering…what type of engine is in this car? I have an 02 ford
taurus ses with a 3.0 v6 ohv and am having problems with the compressor
pulley. I have the parts to install it. i just need to find a way to get
that changed. any idea how long it would take to do the entire process?
I am not skilled at car repair at all. I have no experience. I watched this
video twice and spent $39.99 for the bypass pulley and was finished in 3
hours. Not the greatest time, but I saved lots of money off the $380 quote
I got from the shop. I ran into 2 bumps. I had to remove fans before
disconnecting the side bolt. I was also unaware of the electrical
connection on the compressor and struggled to remove that with grease
covered hands. Thanks for this video. You made my day! 1999 Taurus
Thank you soooo much!!!!! you save me a ton of work. davehull@bresnan.net
No, but it should be discharged the correct way. 1aauto.com 888-844-3393
I got a 96 mustang gt 4.6 cyl and I was wondering if its the same way to
replace it like this ford taurus
I got a 93 Mercury Grand Marquis need to kno How To Install Air
Conditioning Compressor Bypass Pulley cant seem to find any videos on it
plz help
You may be able to follow the steps that we show in the video, if there
isn’t anything in the way of the bolts that you need to remove.
I have a 98 Taurus and for 2 years Ive heard a grindy nasty rattle. Went to
several service stations and no one was able to point out what it was so I
ignored it until it got so bad by ac clutch literally locked and snapped
the serpantine belt. This works really well. You will have to by
environmental regs discharge your compressor, so you WILL NOT have AC, but
this is a very affordable option rather than getting a new compressor. Most
people charge 600 bucks I did this with friends for $80
We do not have a repair shop in AZ, however we do have a warehouse in AZ.
K thanks
Would this removel be about the same on a 03′ Sable?
Should be from 92-03
This model is different from the 2000 Mercury Sable 24v DOHC I am
attempting to work on. Please make an video or side notes for this model.
1 1/2 hours to complete. start to finish.
Great! Just saved me form spending a lot of money. Thanks a bunch.
If you have the 4.6 liter engine the correct part number for your vehicle
is 1AEPM00025 on our website 1aauto.com 888-844-3393 You application may be
a similar process to the one show in the video.
Also check the simple things, check and clean the battery posts and cable
ends and make sure that they are free of corrosion. You may also want to
have the battery and alternator tested to see if they are working okay. If
either one of these are bad, it may cause the car to shut off. Hope this
helps you out.
I have a clicking noise and they mechanic says it’s the compressor. My
question is, with this clicking noise, do i install a pulley or a new
compressor? Love ur videos.
Yes it would replace the compressor.
It should be very close if it isn’t the same.
If the system is still on the vehicle you may want to have it tested to see
if it’s leaking or if there’s an issue with the pump.