please like this video 🙂
Facebook: http://www.facebook.com/Ghostlyrich
Twitter: https://twitter.com/ghostlyrich
did some speakers and a radio for a friend hope you enjoy the tutorial and it helps you replace your stereo in your ford mustang 2002
){kind=link}
There is a third plug on mine with brown and blue wires
There's a third OEM harness for my Mach 460 system and if I'm reading
the wiring diagrams correctly that third OEM harness is a speed sensor
input that controls the OEM head units volume (there's a setting for
it). Apparently, the aftermarket units don't have that option.
If I understand correctly, the stock Mach amps have high and low pass
filters for feeding the tweeters and woofers, respectively, so the
crossover settings aren't necessary?
One thing I've noticed in every video about these installs is that no
one connects the long light green wire to the parking brake. If I read
my written info correctly, the light green wire can be attached directly
to the ground which is what happens when the parking brake is
activated. I'll be doing my install tomorrow and will verify that with
my multimeter
out of all of the videos I've seen, this has been the most helpful for me. thank you!
Thanks for the video! I had a Kenwood deck that came with my 03 GT, but it doesn't turn on. Red Light flashes, but won't turn on. Thinking something got Jarred loose. I just needed to know how to get back there. 🙂
After wired mine up, only right side speakers work with aux cord. Any suggestions?
alright, time to go to a shop and let them do it.
yes late as always but tyvm for tip on mic as mine IS a convertable and could never use it now I can again thank you
does this work with a 2004
your nail is so dirty thanks for the video
hey man do you know where to get an aftermarket wire harness ive been looking all over and havent been able to locate one.
Damn it I've been looking at the comments and there has been people asking where you got that shifter but you don't reply back to them ):
Where can I get a roush shifter like the one you have?!
Looking where the RCA wires come out in the back of the car.
this helped a lot man!! thank you for sharing!!
Nice vid man. What are the wires hanging off of the car's amp connector? If you pause at 2:13 you can see the unused connector hanging there under the amp connector. I can't figure out what this is.
Hey man where did you get that shifter bc my mustang has one but idk where they got it I'm looking for specs
I had to buy a new harness the current one kept going out then it stopped my radio from coming on
Will this be the same for a mach 1 system?
I have 2 blue white wires and 2 black white wires on the 8pin but can't find out where to hook them up…any help please?
On my 04 gt, the wires are all completely different than that of the harness (which came with my jvc head unit). The only similar wire is the black, all others have the same main color but an off stripe. Should I go for it anyways?