Curt shows how to install a Ford torque converter from Thor Converters with a Ford AOD Monster Transmission.
Start by adding fluid to the converter and greasing the torque converter hub, seals and shaft to ensure a smooth installation with out any cut seals. As you install it, you will rotate it clockwise and listen for the clunks as it goes onto the shaft and pump gears.
Always double check your clearance after the install to make sure your torque converter is installed correctly.
As you raise your transmission to install into your vehicle, be sure that the torque converter remains fully installed in the transmission.
Curt takes apart a pump for an AOD to show what can break and where the converter installs into.
MONSTER’S Website: www.monstertransmission.com
Give us a call at: 800-708-0087
Thumbs up the video and SUBSCRIBE for MORE!
https://www.youtube.com/user/MonsterTransmission?sub_confirmation=1
Check out our Socials!
Facebook: https://www.facebook.com/eatmyshift
Instagram: https://www.instagram.com/MonsterTrans/
Twitter: https://twitter.com/eatmyshift
LinkedIn: https://www.linkedin.com/company/monster-transmission-&-performance
){kind=link}
I'm getting ready to do this on a 1988 Ford F250 7.3 diesel pickup and I'm wondering does this same procedure apply to the C-6 transmission.
What torque do you set those nuts to the flywheel??
Loved your video buddy!!!
Question , if the converter is installed wrong to the flexplate , is it possible to make sure that there both damaged ??
Mi transmission make a bad sound on the flywheel and the converter do you think the converter was bad ???
Very helpful. Much appreciated.
Thank you for making this video . ive been rebuilding my f150 1990 eod and this has been my problem understanding its installation . thanks for you clear install video
I appreciate the vedio,lot help.
I'm installing a transmission from junkyard, f150 98 4.2l ur info is very helpful thanks
Very helpful thanks
Good stuff. Close camera shots a big help. Much appreciated.
What a great video.