This video offers a walk-through for installing a set of Spyder CCFL Halo or LED Halo projector headlights in 2006-08 Dodge Ram 1500 models. This video walks you through the wiring process…
Spyder Auto Installation: 2006-08 Dodge Ram 1500 CCFL LED Halo Projector Headlights
75
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
How do you adjust these lights? I bought a truck with them in and my high
beams are where my lows should be.
I’ve searched it and all I can find are guys saying “the adjustment screws
SHOULD BE on the housing behind the light,” but I can’t funds anything that
moves my beams.
A video on this would be very useful.
Where can i get the right plug for the little amber turn signal next to the
leds on the bottom? I looked on the socket and it says CS182F E1.
How do you adjust these lights? I bought a truck with them in and my high
beams are where my lows should be.
I’ve searched it and all I can find are guys saying “the adjustment screws
SHOULD BE on the housing behind the light,” but I can’t funds anything that
moves my beams.
A video on this would be very useful.
Hi why in a ram 2006 i can not pull it out??. I tried i Took the two screws
on the front and the one down the fender 10mm but At the time Inwant to
take it out it Seems a screw At the left top side on the back of the
headlights need to be taken out but your video does not shows how . So
there are two screws
On the front two on the back one down the fender and one that does not
shows the video on the top of the bottom back 10mm screw.can you help me ???
Where can you purchase replaceable bulbs and how much are they?
Can u make it to were the low and high beams come on when u turn the high
beams on. It would make them brighter wouldn’t it? And would u hav to run
it all the way from the light switch in ur cab?
Trox screws are a T27 not T25
Hey i have a 2013 ram and i wanna get some lights will the 2012 headlights
fit the 2013 ram 1500??
i purchased these headlights. turn signal on the far right side has a plug
but no plug on the truck for it nor in the kit for it. and hid’s will not
fit into the projector without modification of the headlight.
great question. there are only two options for halos – LED or CCFL. if it
just says halo it is probably a LED-lit halo. LED lit halos are dimmer than
CCFLs and are visible mostly at night as an accent light. CCFL stands for
cold cathode fluorescent lighting. this is a very bright, crisp white light
because the halos are actually small fluorescent light tubes. These are
more expensive than LED but are easily visible during the day. I hope this
clarifies it for you
Can you replace the bulb for the headlights if they burn out?
Sir please note that these light are halogen and not HID so relay harness
and “canceling resistors” is not need. those part will only be need if you
added and HID kit and you have either a bulb out or lights flickering.
THEy didnt mention relay harness or cancellign resistors. Kinda a lame
video, considering if you do it this way on a Ram it WILL NOT WORK!
Okay so how would i wire these if i want my turn signal to turn on with the
park lights along with leds and halos would i wire them the same way as in
the video?
yes, the bulbs are replaceable. high beam – h1 low beam – h1 led –
replaceable t-10/194/168 miniature wedge signal/parking – 3157
yes we offer headlights for 2009-13 Ram Truck Ram 1500 models and our
headlights should fit as long as your Ram is not equipped with the factory
(OEM) HID system
The socket the far right of the light that does not connect to the truck is
for certain model. The Ram has 2 style of headlight from 06-08. there is
one style that had a amber strip on the bottom of the light and one without
the amber strip. If your vehicle does not have that socket you can leave it
alone or tap the wire. The HID problem you will have to contact the company
you order these lights from because SPYDER does not sell or have HID kit.
yes, the bulbs are replaceable. LOW BEAM – H1 HIGH BEAM – H1 LED –
T-10/168/194 MINIATURE LED TURN SIGNAL – 3157
Whats the difference between Led/ccfl/halo and which is better??
how do you adjust the headlights to align it any help would help thanks
hey there, great question. You’ll use the headlight adjuster bolts on the
backside of the headlight, as you can see them in the link I have attached
to the video description. It’s easiest to adjust them in a darkened setting
with your headlights pointed at a wall about 20 feet away to adjust your
headlights up and down and left to right.
no, that is not easily doable
yes, If you wanted to run your LED/HALO/CCFL you will wire them to you
parking lights.
question. I bought 2003 Toyota camry halo headlights and the rings are led.
I want to open the housing and replace the rings with ccfl. is that
possible? and if so, what is the measurement of the rings? This will help
me greatly! please reply! or email me at haseebinator3@gmail.com. thank you
for your kind help.