Car Fix DIY Videos

Buy Now!
New Shock Absorber from 1AAuto.com http://1aau.to/ia/1ASHA00226

This video shows you how to install shock absorbers on your 2003-2009 Dodge RAM 2500. Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly.

Estimated installation time for a professional technician is approximately: 48 minutes

This repair was done on a 2008 Dodge Ram 2500 SLT 5.7L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2003 Dodge Ram 2500
2004 Dodge Ram 2500
2005 Dodge Ram 2500
2006 Dodge Ram 2500
2007 Dodge Ram 2500
2008 Dodge Ram 2500
2009 Dodge Ram 2500

Tools you will need:
• Pry Bar http://1aau.to/oagv/1AXAA00020
• 21mm wrench
• 21mm Socket
• Socket Driver
• Torque Wrench http://1aau.to/obuI/1AXAA00044
• Safety Glasses
• Floor Jack http://1aau.to/oaMT/1AXAA00068
• Jack Stands http://1aau.to/oazs/1AXAA00065
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.