Buy Now!
New Pulley from 1AAuto.com http://1aau.to/ii/1AEIP00001
1A Auto shows you how to repair, install, fix, change or replace a screeching, squeaking or worn engine idler pulley. This video is applicable to the 04, 05, 06, 07, 08 Dodge Ram 1500
🔧 List of tools used:
• 13mm Socket http://1aau.to/ot5/1AXAA00015
• 3/8 Inch Drive Ratchet http://1aau.to/ot5/1AXAA00015
For More Info visit us at http://1aau.to/h/ZR/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
I was in a pinch and used the grooved pulley from my old tensioner in place of the lower smooth pulley. should I get a smooth pulley for it when I get back home or just let it ride?
Your videos saved me so much time and money. I'm so glad you have so many videos of the ram 1500 because I'm starting to redo my front end and you have every video I needed thank you
Liked the video but you didn't mention the washer or the small plate that you have to put on the front. They do not come with the new replacement part so how do you get them if you need them?
Can always rely on these guys’ vids. Especially since I have same Year/Make/Model!!
Perfect video, thanks.
Can I get the bushing for the idler pulley bolt at 1aauto?
Is this the same for a 2003 Dodge Ram 1500 5.7
Awesome how to! I like how you show the front of the engine with the grille removed to see the entire belt system. Really good visual.
Is this the same for 2007 dodge Durango, can this video be used for a 2007 dodge durango
is there a certain name of the idler pulley under the tensioner.i called the local shop for one and they are asking what idler pulley I need.i just know it as an idler pulley
Great vid. I just changed my idler pulley from the knowledge I obtained through this vid
Thanks for the vid. Made the job much easier.
How do you replace the tensioner?
I own the exact same ram and these videos have saved me a ton of money. I've changed my own serpentine belt, pulleys, and spark plugs. Thanks
When I try to replace the idler pulley on the bottom the pulley doesn't seat all the way back after tightening the bolt and the belt sits half on/off the pulley. Does any one know why this would be happening. also; everything else is in alignment.
how do you replace it on a 2014 dodge durango citadel pulley don't have cente bolt
can this procedure be somewhat relevant to the replacment on a 5.9l, 360ci Magnum?