How to Replace Front Lower Rearward Control Arm 2006-10 Dodge Charger

How to Replace Front Lower Rearward Control Arm 2006-10 Dodge Charger

Buy Now!
New Control Arm Set from 1AAuto.com http://1aau.to/ia/1ASFK00392

Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. This video shows you how to install a new quality TRQ front lower rearward control arm in your 2006-10 Dodge Charger.

• Check here for more videos on the 2006-10 Dodge Charger: https://www.youtube.com/playlist?list=PLJVpHWuCEUX-c73IBzhi5xzeJEd1S3yt9

This process should be similar on the following vehicles:
2006 Dodge Charger
2007 Dodge Charger
2008 Dodge Charger
2009 Dodge Charger
2010 Dodge Charger

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oaXo/1AXAA00013
• Pocket Screwdriver
• 21mm wrench
• 18mm Socket http://1aau.to/oXN/1AXAA00043
• Ball Joint Press
• Torque Wrench http://1aau.to/oag4/1AXAA00044
• Copper Anti-Seize
• Gloves http://1aau.to/otD/1AXSS00048
• Safety Glasses http://1aau.to/ooB/1AXAA00343
• Floor Jack http://1aau.to/oMR/1AXAA00068
• Hammer http://1aau.to/oJs/1AXAA00091
• Wheel Chocks
• Wire Brush http://1aau.to/ooU/1AXAA00079

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

Check out our playlist:
Dodge Charger 2006-2010 6th Generation: https://www.youtube.com/playlist?list=PLJVpHWuCEUX-c73IBzhi5xzeJEd1S3yt9

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

34,091
Like
Save


Comments

TRQ says:

Watch the Video
Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
Do it Yourself
Save Money

joel castro says:

What is the name of tool at 1:47

Darren Clark says:

Does the ball joint move a certain way when I install it for the lower rearward control arm period for 2009 Dodge Challenger RT. Does the ball joint move in the 360 degrees

JustHereToWatch says:

looks like you threaded that bolt bad.

gyver471 says:

Where are you located? I need it done on my car I have a charger.

Micheal Patterson says:

He forgot the torque for the bushings of the front lower forward control arm

Wasteland Yung says:

My mechanic told me get either this one or the forward one how to I know which one cuz we don’t understand each other lol sorry… help ? Tire like jumps a lil when I break should I just get both

Andre says:

what is the tourqe spec on the wheels on the SRT 8?

Charger Jai 007 says:

Could you all do a video on how to change the rear control arms for rwd Dodge Charger 2008, it’s no videos out there

Torrence Estes says:

Yo thats what mine looks like… It's in two pieces though is that not normal?

greg Brewer jr says:

has anyone used any of this TRQ stuff?how does it hold up over time?cant find any reviews

Liam Auigbelle says:

I do believe it is recommended to put the weight of the car on the front suspension and then proceed to torque all the bushings replaced to the required torque spec in order to avoid premature wear on the bushings.

donpoochi says:

how much this repair cost about

Comments are disabled for this post.