Car Fix DIY Videos

Buy Now!
New Axle Shaft from 1AAuto.com http://1aau.to/ia/1AAXS00209

This video shows you how to install a front inner axle shaft on your 2011-2018 Dodge Ram 1500. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.

This process should be similar on the following vehicles:
2011 Ram 1500
2012 Ram 1500
2013 Ram 1500
2014 Ram 1500
2015 Ram 1500
2016 Ram 1500
2017 Ram 1500
2018 Ram 1500

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oaso/1AXAA00013
• Pry Bar http://1aau.to/ojb/1AXAA00020
• 21mm Socket http://1aau.to/ouf/1AXAA00043
• 22mm Socket http://1aau.to/ocV/1AXAA00266
• 35mm Socket http://1aau.to/oV/1AAST00005
• Brake Caliper Hanger http://1aau.to/o3/1AXAA00084
• Trim Tool Set http://1aau.to/oCu/1AXXX00006
• Pliers
• Ratchet http://1aau.to/oauj/1AXAA00016
• Torque Wrench http://1aau.to/oyA/1AXAA00044
• Brake Parts Cleaner
• Bungee Cord
• Cloth Rags http://1aau.to/oiJ/1AXSS00035
• Copper Anti-Seize
• Hammer http://1aau.to/ooa/1AXAA00091

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.