http://www.1aauto.com/1A/SerpentineBelts/Dodge/Durango/1AESB00051 1A Auto shows you how to repair, install, fix, change or replace a broken, cracked, snapped…
http://www.1aauto.com/1A/SerpentineBelts/Dodge/Durango/1AESB00051 1A Auto shows you how to repair, install, fix, change or replace a broken, cracked, snapped…
You must be logged in to post a comment.
){kind=link}
I have no I’m just geussing its the belt I don’t any ideas
Inspect the serpentine belt for cracks on the ribbed side, and replace it if it has cracks. If that isn’t the issue you may need a new belt tensioner if it has lost some of it’s tension. Hope this helps you out. Have a great day! 1aauto.com 888-844-3393
my 2000 dodge durango squeels at begining of starting then goes away ‘new alternator’ could it B the belt help anyone TY
Thanks for watching. 1aauto.com 888-844-3393
I just completed my first belt change ever, on my first car. Thanks!
It should be the same process. There should also be a belt routing diagram in the engine compartment that shows you how the belt is suppose to be routed.
do you put the belt on the same way for a 01 dodge durango with a/c as it is in this video?
For some reason the link keeps directing me to the youtube home page. Thank you tho 🙂
This video will show you how to replace the tensioner. Hope this helps you out. youtube.com/watch?v=OzTqW6ecy-M&feature=plcp
aw I thought this was to remove the tensioner… Oh well back to the drawing board. I actually never needed a diagram. I tend to just feel it out and it works 100 percent of the time. Also what is up with the “Comments may be held for uploader approval”? I’ve never seen that in a how to video :|…
You should be able to move it as shown in the video. They typically don’t freeze up. Usually over time they start to loose tention.
Well what do you do if the tensioner wont budge?
*AWESOME* video. I had no idea it was that easy to change the belt. My ’03 Caravan’s belt is due for a change and hopefully it’s a similar process as this Durango.
awesome this is a great video tutorial
Also check the wire harness that goes between the door and the body of the truck to see if there’s a broke or frayed wire. If there is, that could be causing the issue.
the power windows dont work on my 1999 dodge durango. I am unable to find the fuse that goes to the windows. I have looked on the side of the drivers side dashboard. and also looked near the battery compartment. I am assuming to check the fuse first then go deeper. please help.
thank you so much for this video! i really appreciate it! helped me put the belt on my 92 dodge dakota:)
Awesome! You go, girl.
Thanks so much for posting videos! We’re going to try the repair now.
yyour the best love 1aauto all day
WE have a 2001 Dodge Dakota 3.9L v6. We need to change the plugs and wires. do you have a video for this? Your video demonstrations are so very helpful! Thank You!
I have a 99 Dodge Durango so your videos help a lot, thanks.
Thank you for checking us out.We add to our video library on a daily basis.
This was a really good video.
Thanks for checking us out. We offer a great selection of repair parts for your truck on our website 1aauto.com
Thanks, I just changed mine out on my 1999 Durango last night. Very easy fix, just need help moving the tensioner (I just wasn’t strong enough). You saved me a lot of money, that I didn’t have. I am a 32 year old woman, and if I can do any one can. Thanks again
Thanks.
Seen them go bad at 30K, seen them last to 100K. The start squeaking or groaning. After removing the belt it is one more bolt, so yes it is easy. I should have a video going up in the next few days. Might want to replace the idler pulley while your at it, common problem and easy and inexpensive.
How often do you see that tensioner go bad? Mine seems a little funky, and I’m guessing it would be an easy job to replace it.
Very useful info. Thanks.