http://www.1aauto.com The helpful people at show you how easy it is to install new headlights on your 1998-2002 Dodge Ram. Whether you are looking to fix up …
How To Install Replace Headlight Dodge Ram Truck 98-02 – 1AAuto.com
95
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
Thank you for the video. I installed my headlights with little problem
thanks to you.
Thanks for watching. 1aauto.com 888-844-3393
Is it basically the same set up for a 94 cause I did see all the same bolts
and the gasket is the same
do you have to remove the entire cover if you just want to replace the bulb?
hey man thanks alot, the non sport headlights 94-98 arent the same as this.
Just to let you know that headlight you worked on is a 99-02 not 98-02. And
FYI only the diesel was available in that body style for 02.
Great video awesome info. Thanks!
I do, I even wax em just they oxidize out here, the only time I dont wash
it is because of winter when it doesnt get above 0 degress.
Thanks for the vid, saved me a ton of time. This is identical to my 1995
Ram 2500HD (diesel) Has the same 10mm bolts and everything. Took 15 minutes
to swap out thanks to your video. Appreciated /salute
@SuperD104 We carry some great headlights for your vehicle located on our
website here. 1aauto.com/1A/HeadLights/Dodge/Ram-1500-Truck/-/-/2000
My left headlight on my 97 dodge ram points down and to the right and
shines about 10 feet in front of my truck so it doesnt do me much good. How
do i adjust it to point straight? Do i have to remove my headlight
completely or is there some way i can adjust it without removing the
headlight?
@underarmourfball Glad to help!! Please check out our website or youtube
channel next time you need parts or information.
@Sickram916 1A Auto dot com
Great video. Were could I get those type of headlights for my 98 ram?
alot of help thanks!
the exact video i needed thanks alot man
will sport model headlights fit NON sport models?
There’s an adjusting screw on the back of the headlight. You would need to
adjust the angle of the beam. You can do this by parking the truck 25′ from
a wall. then turn the screw so that the new light comes into alignment with
the beam of the old headlight. Hope this helps you out. Have a great day
1aauto.com
Thanks for watching. Have a great day! 1aauto.com 888-844-3393
Bit quite but awesome and helpful
where can I buy a a head light for a 2000 dodge ram sport 4×4?thanks for
the video wa sa big help!
Thanks so much. This was just as easy as you said and show it is. Did the
passenger side today, waiting for the driver side. Question: I only ordered
the headlight housing only, trying to save money, figuring I could change
it out. Looking at the whole housing, it looks do able. Yes? But will have
to readjust the placement of where the light hits the road. Do you happen
to have video for this also?
@wildmaninmt The headlight should come out just like the headlight shows.
Oh yeah, would it be easier to disassemble and re-assemble the headlights
by removing the front bumper? I know it may be extra work, but it would
make the installation a whole lot better.
you did not show how to remove the lower bolt. that one seems to be a
excuse me i have a 2000 dodge ram and i replaced the headlights because
they were getting more opaque, and the new lights do not go as far and they
are brand new, any advice??
What a good way to protect the new headlights from oxidizing, I have a
dodge 2500 Diesel.
gret vid it helps alot, thanx…
@213mfredy The light should shine just as far as the OE ones. We do
recommend replacing the bulbs if your headlights came with them, because
they are a test bulb and may not be as strong as the ones you previously
had.Hope this helps.
Oh you have too remove the gasket. (doh) I going too remove it to try
figure out why a new bulb won’t go back in. Thanks or the video. 🙂
@YouraN1993R —-FALSE——-If you want to straighten someone out on some
facts,get ’em right…In ’02, the 2500 sport model came equiped with 3
engine options. 5.9 V-8 magnum,8.0 V-10 and the cummins diesel…note: FYI,
your corrected.
My dodge’s headlights did the same thing. Even filled with water. I heated
a nail and melted a small hole on the underside of the light lens for the
water and moister to drain. My lens cleared up nicely afterwards
FYI, This process is much more difficult when your bumper is tweaked lol.
Near impossible to remove the lower bolt closest to primary lamp
You can maybe just try to keep the vehicle clean.
This process I kind of annoying
does anyone know how 19.5’s ride on a 1998-2001 3/4 dodge?
@creepindead You can leave the headlight in your truck. There are two
adjusting screws on the backside of the main beam. There should be one on
the top and one on the bottom of the lens. You adjust the headlight
position by turning these screws. It’s easier to adjust them at dusk or at
night on a flat surface so that you can see where the beam is aiming as you
adjust it. Hope this helps out.
thanx alot….
No you should be able to reach your hand around the back of the headlight
and twist them out.