http://www.1aauto.com/1A/fog-lights/Dodge/Durango/1ALFP00095 1A Auto Shows you how to install, repair, fix, change or replace a broken, damaged, burned out, …
http://www.1aauto.com/1A/fog-lights/Dodge/Durango/1ALFP00095 1A Auto Shows you how to install, repair, fix, change or replace a broken, damaged, burned out, …
You must be logged in to post a comment.
){kind=link}
I have a 2000 Dodge Durango 4.7 Can you show us how to replace a front
bumper
Thanks for showing on how to fix things on dodges .I have 01 dakota 4.7
motor witch is sucking up gas now.runs good and im going to replace the 4
oxygen sensors but no engine is on.what do u think.thanks steve from new
jersey
thanks for all ur videos they helped me alot
Thanks for all your videos. They are very appreciated. It is unusual, but
nice, to find such professional and relevant videos on the web.
Thanks for watching. Have a great day! 1aauto.com 888-844-3393
The housing was broken so the bolts just turn instead of comin out
I have a 2001 4.7 Durango Sport without fog lamps… would it be easy to
install fog lights? and what would it take to install the lightswitch for
the Fog Lamp Option? would it be the same as the durango’s of the 2000 and
before era?
thanks to1 aauto i can replace fog light front and signal light
@dega4amp We’ll keep this in mind if we end up with a 2001 in the shop.
Thank you for checking out our auto repair videos.
if my wiring is there for the fog lights, but no fog lights. how could i
install them without buying an non OE kit. could i just buy the switch and
the OE fog lights and put the fuse in?
THANK YOU SOOOOO FREAKIN MUCH!!! I haven’t had a clue to get those dang
things out.
You would need to find something to prevent that piece from turning, so
that you can back the bolts out. 1aauto.com 888-844-3393
awesome video keep them coming
hey guys i recently bought a 2000 Dodge Durango and it needs a new bumper.
i was wondering if you could do a video on that. all of your other videos
have helped me a lot and that would help me finish my project
They were a factory option. If they aren’t there you would need to install
them.
You should be able to remove it just like our video shows.
Could you guys possibly do a replacement video of the fog light lamp on a
2001 Dakota. I looked at mine and I see only 2 torque screws on the back of
the lamp with what I believe is the adjusting screw on the front. So could
you guys find a 2001 Dakota with foglights and do a replacement video on
replace the lamps(I know how to change the bulb not the lamp)
do 98 durangos come with fog lights or do I have to istall them? cause i
Have a 98 and it doesn t have them
Alright that was a pain to replace. All the bolts were rusted but hey I got
it fixed. To anyone fixing the fog light on the drivers side in a 1998
Durango, good luck! but thank you 1a auto!
We currently do not have an auto repair video for this particular repair.
We’ll keep this in mind in the event that we need to make this repair in
the future.
@jonashbee Not sure, our truck had fog lights originally. The bolts are
10mm, the holes are smaller, 3-5 mm.
You may want to check with the dealer to see what other components you may
need to make them function. 1aauto.com 888-844-3393
@dega4amp The 2001 should be a similar process.
Would this also work on a 2001 dodge Dakota because that’s what I have
do you know if they come pre wired or would i have to wire it?