How To Install Replace Broken Inside Door Handle Dodge Ram Pickup 94-01 1AAuto.com

How To Install Replace Broken Inside Door Handle Dodge Ram Pickup 94-01 1AAuto.com

http://www.1aauto.com/1A/DoorHandleInterior/Dodge/Ram-1500-Truck/1ADHS00371 1A Auto shows you how to repair, install, fix, change or replace a broken or snap…

0
Like
Save


Comments

Jeremy Mitchell says:

Do you have a video for the outside handle same make model

Davoli83 says:

@1aauto I have looked at the hinges and they seem fine, I just replaced the
actuator and that didn’t work. It does seem to be sagging a lil bit but
maybe 1/32″. Also could it be….where the 3 torx go into the actuator? the
bottom right has the metal split to the right of the torx screw.

Davoli83 says:

do you guys know how to fix the latch in same truck? It flipped around and
doesn’t line up with the latch bar. any ideas how to turn it around? I
removed the torx’s around the latch area and can move it a little bit but
is is stuck

1A Auto Parts says:

@Davoli83 You may want to check the door to see if it’s sagging, or if the
door hinge pins are worn, that could cause a latching issue too.

1A Auto Parts says:

@Davoli83 You would need to make sure that the latch inside of the door is
lined up like it was from the factory. If the metal clasps are closed shut,
you can lift up on the outside door handle and pry them free with a flat
head screwdriver.

1A Auto Parts says:

Hi Jeremy, We do carry a replacement exterior door handle for your Dodge
Ram truck, however we currently do not have an auto repair video that shows
you how to make this particular repair. We’ll keep this request in mind in
the event that we need to make this repair in the future. 1aauto.com
888-844-3393

Write a comment