http://www.1aauto.com/1A/IgnitionCoil/Dodge/Intrepid/1AERK00046 1A Auto shows you how to remove, install, repair, or replace your broken misfiring or damaged…
http://www.1aauto.com/1A/IgnitionCoil/Dodge/Intrepid/1AERK00046 1A Auto shows you how to remove, install, repair, or replace your broken misfiring or damaged…
You must be logged in to post a comment.
The combination of great lighting and HD equipment makes a deadly fine
video. Thanks. Can you consider going through how to check and adjust valve
clearance?
@DamonWynters Most likely it is not a coil blowing the engine control fuse.
Check your engine wiring harnesses for a worn wire that is shorting. That
is usually the cause of a repeated blown fuse.
Some spark plugs now have this on the threads in the box, if they do not
you can put a little anti-sieze on the threads so that they are easier to
remove.
Shouldn’t we put a little antiseize oil on the area of the spark plug
touching the engine?
What order are the coils in on the dodge intrepid? I need to replace c and
b but I have no idea which ones those are.
@Yung5499 you may want to make sure it’s getting fuel. Could be a clogged
fuel filter.
If it’s not acting up, you may want to just leave it alone until it does.
I have a 98 intrepid 2.7. The car just turns over and dont start at all. It
had a new battery, spark plugs, crankshaft sensor, camshaft, coils. and It
has just about over half a tank of gas. it was driven to the store and then
never started after that. so if you know what the problem is pleasee let me
know
We currently do not have an auto repair video that shows this particular
repair. If you have a Haynes or a Chiltons manual for the vehicle it should
show you in there. We sell Haynes manuals on our website 1aauto.com
888-844-3393
2 things, i’m having an issue with my ’94 intrepid blowing the engine
control fuse repeatedly. Would replacing the coil help with that and if so
is it any different for that year with 3.3L engine? Also nice good quality
video. Thank you for saving some of us time & money.
Any chance you could make a vid showing starter replacement on the intrepid
(’00 3.2)? Nice videos! Thanks for all your hard work, your videos have
helped me countless times!
cool
@spelunkerd thanks! Checking Valve clearance is way beyond most DIYers and
I like to keep the videos geared to things most people are curious about
trying. Thanks for the suggestion though.
@1aauto Ok i will have to try and see what the results are. I will stay
posted with you and let know what takes place next. Thank you sir
I just purchased this car its a 2.7 engine should i change the coil on it?
Since i am thinking of changin the spark plugs.
hey do you have a video of how to change the spark plugs on a dodge
intrepid ! and what size of tools to use ! ?? thank you !