Applications: 2006-04 DODGE RAM 1500 PICKUP 226 (3.7L), 285 (4.7L), 345 (5.7L) Short Bed, w/26 Gal. Tank This video is about how to install an intake fuel pu…
Applications: 2006-04 DODGE RAM 1500 PICKUP 226 (3.7L), 285 (4.7L), 345 (5.7L) Short Bed, w/26 Gal. Tank This video is about how to install an intake fuel pu…
You must be logged in to post a comment.
Inside of the fuel line there should be one or two O-ring’s. Most likely
one of those has failed. You should be able to purchase replacement
O-ring’s at a local auto parts store or at your local Dodge dealer. If you
need any further help, please don’t hesitate to call our free tech support
line: 800-424-7839. Thanks for watching!
You may need to cycle key a few times to help purge the air from the
system. If after the install & cycling the key a few times it won’t start,
the first check is to see if you hear the pump running. Take off the fuel
cap & listen while a helper cycles the key. If you do not hear pump running
you will need to check power & grounds. If you do hear pump running then
you will need to check the fuel pressure to see if it’s within specs. For
more help on this call our Free Tech Line: 800-424-7839.
Excelente video, muchas gracias por esta valiosa informacion que nos
permiten a nosotros los aficionados a la mecanica, resolver en momentos
dificiles en donde nos quedamos accidentados……..
Thanks for the reply,that’s exactly what it is.I went out there this
morning and pulled the tank out from under the truck into the light and I
could see bits of O ring sitting around the outlet.I probably did it taking
the hose on and off a hundred times trying to get the clips to work.Pump
works great,cost me $200.If I took it to a shop or to the dealer I bet they
would charge $1000+.
I just installed one of your pumpms today on a 2006 Ram 1500 with 5.7
Hemi.It’s the one for 26 gallon short bed and it works fine but the
feed/high pressure line is leaking at the pump.I boogered up the clip on
the old fitting but I got new clips from Dodge and it still leaks. Any
ideas?
What did you use to clean out the fuel tank?
Glad to hear it, Nathan. Thanks for watching the video and for choosing
Airtex!
Hi i did it and now my car wont star i turn the key and the stater work but
the car do no keep on? somebody told me maybe i need to purge the gas or
something like that? help please thanks
After reconnecting the negative battery terminal I would recommend
refueling the tank before cycling the pump. I’m sure that’s what you did
but it’s not shown or suggested in your video.
Just installed one of these today on my 05 Ram. Looks like a nice quality
part, and so far is working great.