Car Fix DIY Videos

In the video, 1A Auto shows how to replace a worn, torn, or rotted inner tie rod boot. The video is applicable to the 05, 06, 07, 08, 09, 10 Chrysler 300.

🔧 List of tools used:
• 20mm Wrench
• 21mm wrench
• 22mm Wrench
• 24mm Wrench
• Complete Metric Socket Set http://1aau.to/taD/1AXAA00043
• Side Cutters
• Slip-Joint Pliers
• Vise Grip Pliers
• Wire End Cutters
• 1/2 Inch Breaker Bar http://1aau.to/tgx/1AXAA00078
• Ratchet http://1aau.to/t9c/1AXAA00016
• Socket Extensions http://1aau.to/tae7/1AXAA00015
• Torque Wrench http://1aau.to/toK/1AXAA00044
• Gloves http://1aau.to/tdc/1AXSS00048
• Marker / Writing Utensil
• Rust Penetrant
• Safety Glasses http://1aau.to/ta/1AXAA00343
• Floor Jack http://1aau.to/tps/1AXAA00068
• Hammer http://1aau.to/thv/1AXAA00091
• Jack Stands http://1aau.to/tpL/1AXAA00065

For More Info visit us at http://1aau.to/h/bkA/

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.