Car Fix DIY Videos

Buy Now!
New Coolant Reservoir from 1AAuto.com http://1aau.to/ia/MPROB00008

This video shows you how to install a direct fit coolant reservoir from TRQ in your 2005-2010 Chrysler 300. Your vehicle is equipped with a tank containing extra coolant, and space for the coolant to overflow to when the system gets hot. A cracked or broken tank could slowly drain your vehicle of much needed fluid. A dirty tank could send debris into the system, clogging it.

This process should be similar on the following vehicles:
2005 Chrysler 300
2006 Chrysler 300
2007 Chrysler 300
2008 Chrysler 300
2009 Chrysler 300
2010 Chrysler 300

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa5M/1AXAA00013
• 10mm Deep Socket
• 10mm Socket http://1aau.to/oaQg/1AXAA00017
• Needle nose pliers http://1aau.to/oyz/1AXAA00051
• Needle nose pliers http://1aau.to/oyz/1AXAA00052
• Pliers
• 1/4 Inch Ratchet http://1aau.to/oaQg/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/oa7J/1AXAA00015
• Gloves http://1aau.to/oDb/1AXSS00048
• Safety Glasses http://1aau.to/owS/1AXAA00343

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.