How To Pre-Wire A Dodge Jeep Chrysler plug and play Remote Start

How To Pre-Wire A Dodge Jeep Chrysler plug and play Remote Start

This kit works on most 2008-2017 Dodge, Jeep and Chrysler vehicles with as little as zero wiring involved!

get yours at www.lesscosales.com
or call us at 904 342 5491

T-Harness combo for Chrysler, Dodge, Jeep and Volkswagen 2008+ Tip-Start vehicles.

The EVO-CHRT4 is the ultimate Factory Fit, ALL-IN-ONE data immobilizer bypass, doorlock, alarm & remote start interface with T-Harness combo module for Chrysler, Dodge, Jeep and Volkswagen Tip Start vehicles.
It raises the standard of hassle-free installation convenience to a whole new level. It uses a multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.

34,048
Like
Save


Comments

Juss meet says:

do the wires need to be cut at all [apart from connecting the yellow one?] will it be a problem if I don't?

thanks

Derek Bee says:

i did i have the fortin evo all chrt 4 t harness wire samething and when i have everything wired and use the electric start it wont let me shift my car out if gear have to shut off the car and turn it back on what can i try or do its a 2009 jeep grand cherokee

Frank says:

Hey Man, thanks for your instruction. I have managed to connect this R.S. to my 2012 Ram Caravan. Not even Fortin's web site was useful..

Andy Schierman says:

Do you make the remote start for a 2020 chrysler 300?

Dashty Fryad says:

Hy thanks for your time.

It's amazing and I was wondering if it can be fitted to 2018 dodge charger and price please.

Mitchell Brudnicki says:

I got one for a 2016, ordered it off ebay but the instructions are way too confusing. It is the evo one with only the t-harness. I am attempting to install tomorrow but I also didn't get a install instructions manual just the one available online. Any info on how to wire this one to work like how you did with this one?

dtaposse says:

Got a link to green and black strippers

Jeepnut666 says:

06 ram do I need a 12v yellow wire run. In Junction with the t harness.

BYEBYE says:

I bought a prelaoded one for my ram followed your steps and programming steps and it doesnt work for me.

Henrique Verri says:

Hello, you have for grand cherokee 2015 6c

Double D's backyard garage says:

Do you have one for 2017 dodge journey push to start?

Julio Portes says:

I have audi a4 2012 is same?

Cheyenne Hurd says:

I was wondering if once this is done if the remote would still work to unlock and lock the doors. And I was wondering if this is available for a 2014 Dodge Dart?

Nebraska Lutheran Campus Ministry_the NeMO channel says:

completed programming, all looks good, blue light flashed rapidly then stopped after hitting the lock button. BUT…when trying to remote start, I'm not getting it to crank (the light on the module blinks blue each time I hit it (3x) but then nothing. Any help would be appreciated!

halojumper81 says:

Do you have one for a 2019 Dodge Durango GT?

Michael Pliler says:

I'm looking to install remote start on my 2004 dodge Dakota it has manual door locks what kit do I need and do you offer one

César Arnaldo says:

How can i do this on evo-chrt6? My t harness not has the yellow wire.

Edward Jones says:

will this work on a 2017 Challenger RT

Kiara Cuevas says:

That connection can be used in a 2005 Jeep Grand Cherokee??????

Comments are disabled for this post.