http://www.1aauto.com/1A/brake-pads-and-shoes/Chrysler/PTCruiser 1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fad…
http://www.1aauto.com/1A/brake-pads-and-shoes/Chrysler/PTCruiser 1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fad…
You must be logged in to post a comment.
Thanks for watching. Have a great day! 1aauto.com 888-844-3393
Watched this video just before replacing the front rotors and pads on my wife’s 2006 PT Cruiser. I’ve changed pads before but never rotors, and was a but apprehensive. Thanks to the great instructions, I got the job done successfully. Thanks 1aauto!
Thanks that was a great presentation.
Thanks for the “walk-thru” on how to replace the front brakes. This was really helpful. Doing the brakes on my 2004 PT today.
You could go to your local auto parts store and buy some anti squeek lubricant for brake pads. It goes on the back of the pad that touches the caliper, not of the braking surface. You could also go back to the dealer and see if they can do this for you. It shouldn’t take them long to do. Hope this helps you out. Have a great day 1aauto.com 888-844-3393
I had new rotors and v line brake pads installed on my 2001 PT, at a Chrysler Dealership 11 mths ago and after only putting on 5000k they are squeaking alot which is annoying.
Any suggestions on how to cure this problems, look forward to your reply, thanks
Great video by the way
Great video, clear & easy to understand! Top notch.
Thanks.
You don’t need to, but if you want to it won’t hurt anything.
I’m getting ready to try this. Do I need to open the brake fluid reservoir or anything before pushing that caliper back?
Awesome video! Thanks for the clear and easy instructions. You were called to teach!
Thanks Mike! Very well put together video. Nice and easy to follow, excellent procedures shown.
good video gonna do mine today thanks
We do have some videos like this on other vehicles, but the procedure on your PT Cruiser would be different.
Can you direct me to a video featuring either a like Chrysler vehicle or another make and model that would have ball joints, with inner and outer tie rod ends?
We currently do not have an auto repair video that shows you how to do this on the PT Cruiser. We do carry the Haynes auto repair manuals that should cover this for you. Here’s a link to them on our website. 1aauto.com/1A/repairmanual/Chrysler/PTCruiser/1AMNL00257/219284/2001?utm_source=youtube&utm_medium=youtube&utm_campaign=1ATony
I have a 2001 PT Cruiser and I love your videos. Any chance you would have videos on replacing the ball joints as well as inner and outer tie rods ends?
Thank you for visiting our auto repair channel on YouTube.
A very clear and easy to follow tutorial…!
attempting on this vehicle tomorrow, thanks mike
It’s pretty much straight forward as the video shows.
i followed all the steps in you video. very easy change of pads and rotors. only to discover I Blew the master cylinder up by pushing the piston back in place without realizing any fluid pressure. Is there a step missing here?
Awesome video! You saved me a ton ot time and a few busted knuckles.
Awesome instructional video!
TY 😀
thanks for the information. very informative!!
Great video, thank you very much!
Greetings from Poland!