Our 2001 Chrysler Voyager minivan air conditioning (and heater) fan would only blow when the fan speed knob was turned to its highest setting. Some quick web…
Our 2001 Chrysler Voyager minivan air conditioning (and heater) fan would only blow when the fan speed knob was turned to its highest setting. Some quick web…
You must be logged in to post a comment.
WOW Thank you for posting, I was going to take my to the mechanic next week but this fixed the problem. I to have the burnt plastic smell but it is getting better and my blower works better than it ever did. Thank you for your knowledge and help
omg god.. ill for sure try this on my just purchased mini van same issue and same model thanks
my problem is similar I have a 1999 chrysler lhs. my blower only blows on high.it never turns off.even if I turn the speed to the lowest it still blows on high.can u please help me.it wont turn off its always on.
Thanks for your very knowledgebale video..thanks alot
There was definitely a smell when first using the new resistor, a smell familiar to anyone who’s worked with electronics (or had an old-school TV burn out), a kind of burning plastic smell. But it faded after a while, presumably after any residual resistor material burned off.
hi hawaii i have a 2002 chrysler voyager and i had the same problem the fan will work only on high speed after i saw your video i check mine and its looks identical to yours i bought the resistor on advanced auto parts its looks the same green after i installed it worked but like after 30 seconds a smell started coming out of the vents its smell like burnt or other smell not natural smell did u have any idea what could it be?
Thanks for the video. Worked perfect! I have all speeds on my fan again! Yeaaaa! Only took 10 min. Thanks again!
I have the same problem and I’m looking forward to fixing my van the same way.
Thank you for a well done video.
This video was so helpful! Thanks for posting- you did a great job!
will this be the problem if the speed knob will work only in low?
nicely done!!!! the internet has saved me bundles. i hope ive even helped others like you have here. im trying to learn all i can right now about woodgas stoves because ill be making one in a couple days. where else could i learn about that, but right here in my comfy chair,on the internet. thanks for the upload!
Glad to have been of service!
This was fabulously easy. Thanks so much for your help.
Marie
Sorry, Bonnie, but I don’ t have that problem… yet! I would imagine it’s the contacts on the sliding doors? Apart from cleaning them, I have no suggestions. Good luck!
OM Goodness! I am going to try this! Please work! I have the same vehicle. By chance, have you had any problems with your doors? My door ajar light comes on when I take a turn. Then stays on until I spray some dry electrical spray on the door connectors. And, as you know, the lights are BRIGHT in these vans if they are all on at night.
Glad it helped!
beat vudeo ive found yet. ive had this wxact oart for the same exact van amd have bwen holding onto the part for over a year because i was told that i had to tear into the dash. thanks!!! BDH