Car Fix DIY Videos

#Chrysler 300 300c #Hemi DiabloSport Tune Install Intune I3 Fast ! with #Mopar bro #fred_eazy21

For 2015 & up Chrysler 300c’s hit up the below link (Similar procedure)
Jeep PCM Swap: https://youtu.be/qsIw4b7IfbI

What’s up Everyone Welcome back to the channel! Installing a DiabloSport tune on a 2011 Chrysler 300c is easy to do but takes a bit of time, so sit back, relax and enjoy the process!
The process took about an hour but I would leave myself 2 hours just in case you need to call into Diablosport for any technical issues.

Ok so Unlocked PCM’s and Security By-pass modules are required for tuning for the 2015 to 2021 DODGE-CHRYSLER and JEEP Vehicles. So we’re going to assume that you have swapped your factory PCM with an unlocked one or that you have a mopar between 2005 to 2014. For the 2015 and up Mopars ya’ll can Check out our PCM Swap episode Link in the description and in the comments below!

Alright so the Tools of the trade for today are:
Patience
A computer with internet access
and a DiabloSport tuner…Today we will be using a DiabloSport I3!

1) Alright let’s get it. First thing to do is to hop onto your computer and head over to diablosport.com/downloads to download and install Update agent 1.0.

2) After that plug in the diablo sport tuner via usb and open the update agent 1.0. The update agent will recognize the tuner and start updating the tuner if there is an update available.

3) Next follow the directions displayed on the diablo sport tuner and on the update agent program. It’s going to take some back and forth so be patient.

4) After the update is completed head over to the mopar and plug it into the OB2 port in which the tuner will boot up.

5) Now a disclaimer will pop up, just hit that yes button to get into the main menu.

6) Next Hit that Tune Vehicle tab in which the tuner will ask you to cycle the mopar into the run position but do not start the engine! Next hit that continue button on the tuner.

7) Once the next menu appears on the tuner, hit the Eazy tune tab and choose your desired tune, in the next menu choose it again and hit yes on the disclaimer box.

8) After that, on the next menu hit install tune and on next menu hit modify stock tune and hit yes when asked to use the selected tune.

9) The tuner will ask you if you would like to modify parameters such as tire size and removing the speed limiter. Adjust them as you prefere.

10) Next The tuner will start installing the tune beginning with loading the Original back up. The tuner will ask you to cycle the mopar to the off position and back into the run position several times so be patient and follow the tuners commands as they come.

11) Once the back up tune is loaded, the tuner will again ask you if you would like to install the tune. Hit yes and go through the process again as it will ask you to cycle the mopar to the off position back to the run position several times as it installs the canned tune.

12) Finally once the tuner tells you “Tuning is complete” Unplug the tuner from the OBD2 port and start the Mopar up!

Congratulations you have now installed a canned Diablo Sport Tune on your Mopar! Pretty easy eh?! As mentioned before The process took about an hour but I would leave myself 2 hours just in case you need to call into diablosport for any technical issues.

Diablo Tuning is available for mopars all the way from 2005, as mentioned before 2015 and up mopars require unlocked PCMs for tuning and 2018 and up Mopars require a bypass module along with the unlocked PCMs for tuning.

Alright so Stay tuned for our next episode as we will pull the tune out and send it over to Hemifever for custom tuning!

For more Great Mopar​ content of me and my Jeep​ SRT please click below and subscribe!

https://bit.ly/2Mcz3tR