Watch Rollin Thunder’s Master Installers Shawn Elkins and Chris Hall customize the dashboard of a 2002 Chevrolet Avalanche to accommodate a 7″ Display (2 Din…
Watch Rollin Thunder’s Master Installers Shawn Elkins and Chris Hall customize the dashboard of a 2002 Chevrolet Avalanche to accommodate a 7″ Display (2 Din…
You must be logged in to post a comment.
')){kind=link}
Gotta thank you for this post. I have an 02 Avalanche and I kept on
breaking the tips off of my RCA patch cables and couldn’t figure out why.
Now I know that the brittle plastic shelf has to be eliminated. Ever since
I did that its been smooth sailing. Thanks so much!
sorry not to say all radio places do it this way but a bucket or even a
cheap 10 aftermarket 03 double din kit would be better than 2 bend pieces
of metal but if these guys take 3 times to put in a screw in the same spot
what can you expect. I am a construction worker and i could fine better
solutions than this jimmie rig stereo install
i am assuming a 03-06 radio cage and dash bezel was to mainstream?
I installed a kenwood double din in my ’01 sierra in under 45 minutes using
an ’03 radio cage and dash bezel :)
You could have bought the clips online for 10.00. I bought mine for my 99
Chevy Silverado and it was so much easier installing the speakers.
Excellent work guys. Im planning a double din android install into a 2002
denali and was wondering if you cold tell me if
http://www.amazon.com/dp/B000CE9OXS/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=2WADPYLKBB4LZ&coliid=I36VMTSAGXN18S
I will not be using any of the bose system but still want the onstar to
work properly.
Never use electrical tape use heat sink raps.
Great instructions and video right up to the redneck mount for the radio. I
have a 2002 Avalanche and found a retrofit radio bucket online worked
perfect. I also considered a 2003 radio bucket and dash bezel from a
junkyard but the retrofit kit was the easiest solution. I would never put
in a radio like this that I cared about.
This video will help me out a lot! Perfect! Thank you! But I wonder where
can I buy that usb/aux adapter that was installed in the dash!? 🙂
Love the installation..gave me a better understanding of how to get it
done. .
Sorry JJ find’t realize the customer asked for that type of install. like I
said great work but some customers want fast over doing it “right”.
Excellent work by you guys, two thumbs up. I wish I saw this before my jib,
it would have helped but I figured it out. keep up the excellent videos.
Do you know the model number of the stereo?
Great install. Good explanations
How much did this custom install cost? It looks pretty good for an
application that required a lot of extra room to be made.