Buy Now!
New Throttle Body Assembly from 1AAuto.com http://1aau.to/ib/1ATBA00020
Rough idle, poor performance, and a check engine light are all signs of throttle body problems. If a thorough cleaning didn’t resolve the issues, you may need to replace the assembly. This video shows you how to install a new, engineered to fit TRQ throttle body on your 1999-2007 Chevy Silverado.
• Check here for more videos on the 1999-2007 Chevy Silverado: http://www.youtube.com/playlist?list=PLJVpHWuCEUX9UxfAHgxfkoYJPq4Q1iy4k
This process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500
Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa/1AXAA00013
• Pocket Screwdriver
• 8mm Socket http://1aau.to/oa/1AXAA00017
• Hose Clamp Pliers http://1aau.to/oa/1AXAA00076
• Needle nose pliers http://1aau.to/oa/1AXAA00051
• Needle nose pliers http://1aau.to/oa/1AXAA00052
• E5 Socket
• Socket Driver
• Socket Extensions http://1aau.to/oa/1AXAA00015
• Gloves http://1aau.to/oa/1AXSS00048
• Paper Towels http://1aau.to/oa/1AXSS00035
• Safety Glasses http://1aau.to/oa/1AXAA00343
• Drain Pan http://1aau.to/oa/1AXAA00320
• Pick http://1aau.to/oa/1AXAA00037
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
Check out our playlist:
Chevy Silverado 1999-2007 1st Gen: https://www.youtube.com/playlist?list=PLJVpHWuCEUX9UxfAHgxfkoYJPq4Q1iy4k
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Good video. Just changed the throttle body on my 03. Piece of cake. A heads up though. The ECM had to relearn the TPS and I had to clear the codes to get the check engine light turned off.
hey what is the black thing with the electrical connector and green cap directly above the top TB mounting stud. mines a bit loose and my truck is stalling. is this EGR or some evap device?
Could the air bubbles make it throw codes p2135 chevy avalanche
Does the link to the throttle body part fit on a chevy 1500 v8 4.8?
Great video. Do you have to go through a relearn process after replacing the? Thanks
What size are the throttle body nuts
Did u forget to disconnect the battery or in this case its not needed?
I just did this on my 03 silverado. Great video, very helpful. Although I didn’t need to remove any studs it just came right out after disconnecting the coolant lines.
What about relearn?